| Use power |
AC100V ± 10V 50 / 60Hz |
| Output voltage |
Variable output: AC0 ~ 130V constant current output: AC50V ± 5V |
| Withstand voltage output current |
15A (30 minute rating) * overcurrent protection circuit will operate at about 16.5A. |
| Relay output current |
Variable Output: AC50A (30 seconds rated)
constant current output: The output Zerokusu output. |
| Current range |
Adjustable Output: AC0.1 / 0.25 / 0.5 / 1 / 2.5 / 5/10/25 / 50A
constant current output: AC3 / 3.5 / 4 / 4.5 / 5A relay tap for 150/200/300/400/500/700 / 1000% of the current output
* output current for each set value, displayed on the display. |
| Output frequency |
The same as the input power source |
| Total distortion factor |
Variable output: the same as the input power supply
constant current output: within 10% |
| Output stability |
Variable output: the same as the input power supply
constant current output: within ± 1% of each range |
| Indicating instrument |
0.1 / 0.25 / 1 / 2.5 / 5/10/25 / 50A
moving coil-shaped, 1.0 grade with mirror (True RMS conversion method) |
| counter |
0 ~ 199.999sec resolution 1Ms
200 ～ 1999.99Sec resolution 10ms (with automatic carry function) |
| Counter accuracy |
0.01 Pasento rdg ± ± ± 1Dgt 5Ms ± ⊿T
⊿T: each error of the stop signal
contacts, DC voltage 1Ms ±
AC voltage (5 ～ 10V) ± 5Ms
AC voltage (10 ～ 20V) ± 2.5Ms
AC voltage (more than 20V) ± 1ms
self-power ± 3ms
case of ※ stop due to self-supply, supply load state of the power supply (by the rotating equipment, etc.
depends on the counter-electromotive force, the residual voltage of the capacitor, etc.).
The above accuracy, power supply of the counter is the accuracy of to completely cut off. |
| Stop signal |
Contact: a contact, b contact automatic detection
voltage: direct current, alternating current with 10 ~ 220V applied, remove
the self-power: there is no power at the same time tester and the display time for about 5 minutes (the relay is operated, it is that the counter is stopped. )
* count start from 600 seconds (10 minutes from the start) at the time that elapsed, the operation buzzer, the operation lamp will operate for 10 seconds.(Timer function for pressure test)
* with automatic reset function |
| Auxiliary power |
AC100V (outputs the input power) 10A |
| External dimensions |
300 (D) × 500 (W) (excluding protrusions) × 200 (H) |
| weight |
About 18kg |
| accessories |
Test code set (with storage bag) owner manual case cover |