| Use power |
8 AA alkaline batteries |
| Recorder input |
(In 1μA DC10mV) current recorder input within 3% ± for accuracy 1μA |
| (At 1kV DC10mV) voltage recorder input within 3% ± for accuracy 1kV |
| Memory measurement function |
Memory contents |
Measurement switch "ON" in the current that is converted input to the DC voltage, to start recording of the voltage, the until the "OFF" the measurement switch and 1 data |
| The measured current |
0.001μ ~ 40μA (Low range) 0.1 ~ 800μA (Hi range) |
| resolution |
0.001μA (Low range) 0.2μA (Hi range) |
| Measured voltage |
0 ~ 22kV (measurement) |
| resolution |
0.01kV |
| Sampling rate |
About 5 times / sec. |
| The number of memory |
50 data |
| Trigger operation |
From the start of the measurement after 1 minute, if the set value or more of current flows, to record the current value.Recorded content, the time becomes equal to or less than the set value to the time equal to or greater than the set value from the high voltage output, during which the maximum value |
| The number of trigger data |
Hundred |
| Trigger setting range |
0.1μA ~ 40μA (Low range), 2 ~ 800μA (Hi range) |
| Trigger setting unit |
0.1μA unit (Low range), 2μA unit (Hi range) |
| backup |
Measurement memory backup with lithium battery |
| Communication port |
RS-232C, USB port |