| Use power |
Built-in nickel-cadmium batteries (DC6V) |
| Charging power supply |
AC100V ± 10V 50 / 60Hz |
| charging time |
About 3 hours (overcharge protection circuit installed) |
| Number of operations |
At full charge about 250 data printable |
| Printer |
About 130 data in the thermal printer (paper width 8㎝ length 25m) new roll |
| Measurement time |
50/100/250 / 500ms |
Sampling time
and resolution |
50ms range → 500μs 250ms range 2.5Ms ￫
100Ms range → 1ms 500ms range → 5ms |
| The recording operation |
Electric:
① from the time you press the electric operating signal output switch of the apparatus, to start recording. (With the change-over switch)
from the point of contact or voltage signal is changed to ② trigger input connector, and start recording. (With the change-over switch)
manual:
out of each measurement contact, from the time there is a change even one contact to start recording. |
| Breaker contact input |
Measurement contact No-voltage contact
measurement voltage DC5V |
| External trigger input signal |
Contact: a contact, b contact automatic detection
voltage: direct current, alternating with 5 ~ 220V applied, removed |
| Electric operating signal |
a contact, b contact switching (signal output is cut off, the common is common in the input switching) |
| External dimensions |
196 (D) × 296 (W) × 218 (H) |
| weight |
5kg |
| accessories |
Test code set (storage bag with) owner manual recording paper (one for the body, the other two included) |
| option |
Recording paper 10, Volume 1 pack standard price of 8,000 yen (consumption tax) postage 1,000 yen (excluding tax) |