| Input Method |
Single-end |
| A/D Conversion Method |
ΔΣ conversion method |
| Sampling Rate |
MAX. 250 times / sec. |
| Display |
Main display:
Red/Green 7 segments LED display(Character height: Approx. 14.9mm)
Sub display:
White 7 segments LED display(Character height: Approx. 9mm) |
| Polarity Display |
Displayed automatically for negative results. |
| Display Range |
-19999~99999 |
| Zero Display |
Leading zero suppress |
| Outer Control |
4 out of the following 5 functions are assigned to the external control terminals.
* If the pattern select function is included, the remaining terminals available for other functions will be limited.
2 more functions (if 4 patterns used) or 1 more function (if 8 patterns used)
①Pattern select
②Hold
③Peak hold / Bottom hold / Peak to peak (Difference between the peak and the bottom)
④Forced-zero
⑤Relay reset |
| Range of Use Temperature |
-5~50°C |
| Range of Use Humidity |
35~85%RH(No condensation) |
| Storage Temperature Range |
-10~70°C |
| Storage Humidity Range |
60%RH or less |
| Power |
AC100~240V±10% 50/60Hz |
| Power Consumption |
AC100V: 12VA max.
AC240V: 15VA max. |
| External Size |
96mm(W)×48mm(H)×99.7mm(D) |
| Mass |
Approx. 250g |
| Dielectric Strength |
Between Power terminal and Input terminal / External control terminals /Analog output AC2000V for 1 minute |
| Between Power terminal and Comparative output AC1500V for 1 minute |
| Between Input terminal and External control terminals/ Analog output / Comparative output AC1500V for 1 minute |
| Between Case and Terminal AC2000V for 1 minute |
| Insulation Resistance |
100MΩ min. at 500V DC between above terminals |
| IP Rating |
IP66(Front) |
| Case (Material / Color) |
Polycarbonate / Black UL94V-0 |
| Overrange Display |
OVER or –OVER for any input signal outside the display range.
"OVER" or "-OVER" is displayed if input exceeds the measurement range by more than ±10%. |
| Decimal Point |
Can be set at any desired place. |