Trang chủ Cảm Biến - Đồng Hồ Đo Thiết Bị Đo Nhiệt Độ Thiết bị đo hãng Valcom

Cảm biến đo áp suất HSMC2 Valcom

Mã sản phẩm: HSMC2 |
Thương hiệu: Valcom

Giá bán: Liên hệ

■2 setting outputs + 4 to 20 mA(with analog output scaling function)
■Quick zero-adjustment, tracking zero adjustment, loop check and moving average are included as standard.
■Safe and reliable construction with break-proof diaphragm
■Safe and reliable construction with no sealed liquid.

Yêu cầu giá tốt: 0984843683, Email: hien@ttech.vn

Chúng tôi cung cấp các thiết bị đo lường sau:

Thông tin sản phẩm

Measured medium	Alcohols, milk beverage, seasoning, pure water, chemical or other media. (These vary according to sensor materials)
Pressure type	Positive and negative pressures can be measured.
Pressure range	Can be specified within the range of 50 kPa to 3 MPa (Calibration:25kPa~3MPa) of rated capacity.
Output type	4~20mA(4 wire system) 2-point photo-Mos relay output. Specify more than 50% of rated capacity as the calibration range.

Specification 1 (Sensor assembly)

Sensor Connection	ISO Ferrule, VARIVENT®, ISO Cap nut, Screw mount, Other special orders
Rated Capacity(R.C.)	50, 100, 200, 300, 500, 1000kPa, 3MPa
Material	Sensor: SUS316L / Hastelloy C276 / SUS329J4L
Finish(Sensor Part)	Electro-Chemical Buffing
Safe Overload Rating	400%R.C. (Rated capacity 3MPa: 150%R.C.)
Destruction Point	1000%R.C. (Rated capacity 3MPa: 300%R.C.)

Specification 2 (Amplifier + Sensor assembly)

Non Linearity	±0.5%R.C.
Hysteresis	±0.5%R.C.
Compensated Temperature Range (Wetted part)	-5~150°C
Safe Temperature Range (Wetted part)	-5~150°C
Temperature Effect on Zero Balance	±0.5%R.C./10°C (Rating: 300, 500, 1000kPa, 3MPa)
Temperature Effect on Zero Balance	±0.7%R.C./10°C (Rating: 50, 100, 200kPa)
Temperature Effect on Load	±0.5%R.C./10°C (Rating: 300, 500, 1000kPa, 3MPa)
Temperature Effect on Load	±0.7%R.C./10°C (Rating: 50, 100, 200kPa)
Ambient Temperature and Humidity	Temperature:0~50°C(No freezing), Humidity:0~90%RH(No condensation)
Material	Aluminum die-casting(Case material) Acrylic(Front) SUS304(Radiating fin)
IP Rating	Equivalent to IP65
Mass	Standard: Approx. 960g (A sensor assembly is included. / In the case of ISO ferrule 2S)
Accessories	Operation manual (1 copy), Test report (1 copy), 1 of connector for a power supply input 1 of connector for a setting output at an analog. (*1)