| Mechanical design |
A replaceable measuring insert that is spring loaded with connection head and necktube. |
| Necktube |
Necktube stainless steel mat.-no. 1.4305 (303), male thread G 1/2 B
length L= 45 mm |
| Electrical connection (options) |
· model B, cap with 2 slotted screws, mat. aluminium, IP 54
· model BUZH, high spring cover with slotted screw, mat. aluminium, IP 65
· field housing Ø 60 mm, screw cap, mat. stainless steel mat.-no. 1.4305 (303), IP 67 according to DIN EN 60529
· circular connection with screw connection M12, IP according to DIN EN 60529 |
| Measuring insert |
Ø 6 mm, stainless steel with silver tip, thermal isolation with plastic insert.
Measuring insert screwed into the connection head under spring tension. Use heat sink compound as per data sheet T6-030. |
| Measuring resistor |
1 x Pt 100 in 3-wire technology per DIN EN 60751 class A |
| Temperature range |
-20...150 °C |
| Response time / accuracy |
see data sheet |
| Weights |
- with connection head model B: 0.45 kg
- with M12 circular connector: 0.30 kg |
| Accessories |
- Weld-on socket G 1/2 with bore hole 6.1 mm, material 1.4435 (316L), Ø = 30 mm suitable for welding to a tank / pipe ≥ nominal width 80 mm, order code MT8200-A1 |
| |
- Weld-in socket G 1/2 without bore hole, bottom piece reduced to 1 mm for fast response, stainless steel mat.-no. 1.4435 (316L) suitable for welding in a tank with a Ø 30 mm bore hole, order code MT8200-A2 |
| Integration transmitter* |
Suitable Pt 100 transmitters may be integrated in the connection head. The following devices are available:
a) transmitter instead of terminal block
b) transmitter mounted in the spring cover
of the connection head BUZH
The transmitter is integrated directly in a stainless steel case in the M12 circular connector. |