General
|
| Power Requirements |
85 to 264 VAC, 50/60 Hz, 25 VA max consumption and 12 VDC, 1.2A |
| Pneumatic Power Supply |
75 psig (500 kPa) shop air at 15 to 75 scfm (425 to 2,125 slm) and 100 psig (700 kPa) clean, dry gas |
| Test Gas Supply |
400 to 3 000 psi (3 to 20 MPa) Maximum high pressure output is high pressure supply times 25 |
| Operating Temperature Range |
18 to 28 °C (64 to 82 °F) |
| Weight |
| RPM4/HPMS: |
11.0 kg (22 lb) |
| GPC1: |
24.0 kg (53 lb) |
| GB-152: |
16.4 kg (36 lb) |
| Total: |
51.4 kg (113 lb) |
| Benchtop System Footprint (GB-152 Gas Booster mounted under bench) |
75 cm W x 60 cm D (30 in. x 24 in.) |
| Overall Pressure Range |
| Gauge mode: |
0 to 10,000 psig |
| Absolute mode: |
atm to 10,000 psia (70 MPa) |
| Standard Test Fluid |
Any non-corrosive gas |
| Test Connection |
DH500 (gland and collar type for coned and left hand threaded tube equivalent to AE F250C, HIP HF4, etc.), adaptors to 1/8 in. NPT M, 1/4 in. NPT M, 1/4 in. NPT F, AN4 M provided |