Minilyzer Analog Audio Analyzer ML1 NTI Audio

Mã sản phẩm: ML1 |
Thương hiệu: NTI Audio

Giá bán: Liên hệ

Máy đo và phân tích âm thanh Minilyzer Analog Audio Analyzer NTI Audio ML1

Model: ML1  Hãng: NTI Audio

Yêu Cầu Giá Tốt

Thông tin sản phẩm
Level
Continuously measures absolute input levels either in volts, dBu or dBV and the signal frequency. Relative measurements are also supported. Connecting MiniSPL further supports basic SPL and LEQ measurements.

THD+N
ML1 supports the measurement functions Total Harmonic Distortion plus Noise (THD+N) and 2nd to 5th selective harmonic distortion as dB value or in %. Input level and frequency measurement runs in parallel and balance indicator finds defective cables.

Frequency Sweep
ML1 automatically triggers to a sweep sequence with any step width and records the frequency response. The Minirator MR2 or MR-PRO may be used as signal source. After capture all sweep data is available.

Polarity
Finding wrongly connected speakers is as simple as moving ML1 into the sound field of the speaker under test and its polarity will be displayed. The same measurement through the XLR input is ideal for cable tests.

Time Sweep
Intermittent faults are often hard to find. The time sweep records the RMS level, frequency and the THD+N value simultaneously, helping to monitor the audio signal during a long period of time for later analysis.

Scope
Provides a quick and robust look at the waveform of the balanced audio signal, quickly finding clipping amplifiers etc. The auto-scale and auto-trigger functionality are normally only found in expensive stand-alone scopes.

1/3rd Octave

Analyze and improve sound systems using the 1/3rd Octave analyzer. With Pink Noise as a stimulus the frequency response of every sound system is directly visible on the Minilyzer screen. The peak frequency display supports you in finding feedback frequencies.

vu/PPM
Do you have to supply your mix to a broadcast van? By using the vu&PPM meter with free adjustable reference levels you can provide a perfect leveled signal. The vu meter enables you to adjust your outboard equipment for a perfect compression of your sound material.
Minilyzer ML1 screen AFILS
Induction Loop Measurements AFILS
The Minilyzer together with the optional MiniLINK USB interface measures induction loops AFILS in accordance with the IEC60118 standard. A complete measurement menu following the standard can be enabled including calibration to customer field sensors.


>>>  Acoustilyzer Acoustic Analyzer AL1 kiểu dáng mới

SẢN PHẨM CÙNG DANH MỤC