| Enclosure |
Weather resistant, chemical resistant, RF/EMI coated high impact polycarbonate polyester blend. Can be set in rain or into 2.5 inches of water without damage. Ergonomically balanced with rugged top mounted handle. |
| Dimensions |
10.5" long x 5.9" x 7" tall |
| Weight |
5 lbs. |
| Detection Principle |
Catalytic combustion, electrochemical cell, galvanic cell, and infrared. |
| Sensor Life |
2 years under normal conditions. |
| Sampling Method |
Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH. |
| Display |
4 x 20 LCD readout with backlighting. Viewed through window in case top. Displays readings & status of all channels simultaneously. |
| Alarms |
2 alarms per channel plus TWA and STEL alarms. Fully adjustable for levels, latching or self reset and silenceable. |
| Alarm Method |
Buzzer 85dB at 30 cm, dual high intensity LED’s, and blinking display. |
| Controls |
6 external push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA /STEL values, battery status and many other features. |
| Continuous Operating Hours |
30 hours minimum using alkaline batteries, or 18 hours using Ni-Cads. |
| Power Source |
Size D batteries, 4 alkaline or Ni-Cad. Charger has alkaline recognition to prevent battery damage if alkalines are charged. |
| Operating Temp. & Humidity |
-10°C to 40°C (14°F to 104°F), 0 to 95% RH, non-condensing. |
| Indication Accuracy |
Maximum variance +/- 5% of full scale. |
| Response Time |
30 seconds to 90% (for most gases). |
| Safety Design |
Intrinsically Safe, Class I, Division 1, Groups A, B, C and D. CSA / NRTL & UL Classified (most versions). |
| Standard Accesories |
Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose (for special toxic gas versions, shorter teflon hose used without probe).
|
| Optional Accessories |
• Datalogging of up to 4 gases (No datalogging possible on 5 or 6
gas versions or versions with more than 2 toxic sensors)
• Remote alarm
• Dilution fitting (50/50)
• Ni-Cad batteries
• Battery charger, 115 VAC, 220 VAC, or 12 VDC
• Continuous operation adapter, 115 VAC or 12 VDC
• Extra loud buzzer
• Extension probes
• External hydrophobic filter
|
| Warranty |
One year material and workmanship
|