|
Enclosure
|
Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64.
|
|
Dimensions
|
9.5” L x 5.25” W x 5.875” H
|
|
Weight
|
3.8 Lbs (standard 4 gas with batteries)
|
|
Detection Principle
|
Catalytic combustion, electrochemical cell, galvanic cell, infrared, photo ionization detector, and thermal conductivity.
|
|
Sensor Life
|
2 Years under normal conditions.
|
|
Sampling Method
|
Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH
|
|
Display
|
3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand with adjustable time.
|
|
Language
|
Readout can display in 5 languages (English, French, German, Italian, or Spanish.
|
|
Alarms
|
2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable.
|
|
Alarm Method
|
Buzzer 95 dB at 30 cm, four high intensity LED’s.
|
|
Controls
|
4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features.
|
|
Continuous Operation
|
At 70°F, 16 hours using alkaline batteries, or 18 hours using Ni-MH.
|
|
Power Source
|
4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines).
|
|
Operating Temp. & Humidity
|
-20°C to 50°C (-4°F to 122°F), 0 to 95% RH, non-condensing.
|
|
Response Time
|
30 Seconds to 90% (for most gases) using standard 5 ft hose.
|
|
Safety Rating
|
Intrinsically Safe, Class I
Groups A, B, C, D.
Approvals: CSA / CE
|
|
Standard Accessories
|
Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter
|
|
Optional Accessories
|
- Dilution fitting (50/50)
- Ni-MH batteries
- Battery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours) with continuous operation function
- Extension hoses
|
|
Warranty
|
Two year material and workmanship, one year for PID sensor
|