General
|
| Power Requirements |
FPG8601 85 to 264 VAC, 50/60 Hz, 60 VA max
VLPC 85 to 264 VAC, 50/60 Hz, 70 VA max |
| Normal Operating Temperature Range |
20 to 26 °C |
| Ambient Temperature Stability |
0.1 °C/minute max rate |
| Weight |
FPG8601 Platform 30 kg (66 lb)
FPG8601 Terminal 2 kg (4.4 lb)
VLPC Pressure Controller 41 kg (90.4 lb) |
| Dimensions |
FPG8601 Platform 53 cm H x 36 cm W x 35 cm D (21 in. x 14 in. x 14 in.)
FPG8601 Terminal 12 cm H x 15 cm W x 20 cm D (4.7 in. x 6 in. x 8 in.)
VLPC Pressure Controller 31 cm H x 51 cm W x 53 cm D (12.2 in. x 20 in. x 21 in.) |
| System Controller |
Runs FPG Tools™, Windows® operating system, RS232 and IEEE-488 interfaces to FPG and DUT data acquisition |
| Overall Pressure Range |
0 to 15 kPa gauge, absolute, absolute differential |
| Test Medium |
N2 or Air |
| Mode Change Time |
Absolute to Gauge 30 minutes
Gauge to Absolute 1 hour |
| Vibration |
Same as conventional piston gauge, vacuum pumps must be connected by flexible tubing |
| Pressure Supplies |
Piston-Cylinder Lubrication Gas(FPG8601): 700 to 800 kPa, clean, dry N2 or Air
FPG Reference Vacuum (for absolute modes): Turbo pump: 378 m3/hr typical, 8.10-6 Pa ultimate pressure
Rotary vane pump: 16.5 m3/hr, 0.2 Pa ultimate pressure
VLPC Supply : 700 to 800 kPa, clean, dry N2
VLPC Vacuum: 10 m3/hr @ 0.5 Pa
Drive Air (FPG8601 and VLPC): 400 to 700 kPa shop air |
| Pressure Connections |
Test high (FPG8601): KF16
Test low (FPG8601): KF16
Vacuum Ref (FPG8601): KF25
Vacuum (FPG8601): 1/8 in. NPT F
Drive/lubrication (FPG8601): 1/8 in. NPT F
Supply (VLPC): 1/8 in. NPT F
Drive (VLPC): 1/8 in. NPT F
Vacuum (VLPC): KF25 |