The self-calibrating function of the instrument ensures that the measurements are always accurate. Display of the measured values in a selection of scales: e.g. Tesla, A/m or Vs. In this way optimal use is made of the possible applications.
Very easy to operate because of:
- Drift compensation
- Digital display filter
- Conversion of measuring scales
- Self-calibration
- Bar graph display
- Window comparator
Percentage display
- Physical probe parameters saved in memory
- Automatic probe identification
- Choice of manual or automatic range
- Remote control via digital interfaces
Thông số kỹ thuật
| Technical data: |
Fluxmeter F 10 |
| Measuring mode: |
free of drift integrator with 24-bit A / D-conversion |
| Measuring ranges: |
400 µVs, 4, 40, 400 mVs |
| Resolution: |
maximum 0,1 µVs |
| Selection of range: |
automatic or manual |
| Accuracy: |
0,1 % after self-calibration |
| Measuring rate: |
50 measurements / sec |
| Internal calibration: |
voltage- / time reference |
| Drift: |
<± 1 µV s / min |
| Input resistance: |
1 kOhm, 10 kOhm ± 0,1 % |
| Connections: |
thermal low voltage mini-sockets on the front and back panel |
| Display: |
LCD 100 x 80mm, 4-digit display of measured value, bar graph display |
| Digital output: |
low / high / in / run |
| Digital input: |
reset / hold / range / drift zero |
| Interfaces: |
RS-232 C, USB optional |
| Analogue outputs: |
1x galvanically isolated, ± 10 V
1x configurable (average value, min. / max., peak / peak, ± 10 V) |
| Peak value memory: |
digital recording at intervals of 20 ms,
analogue recording for high-speed pulses (optional) |
| Dimensions: |
120 x 250 x 250 mm (height x width x depth) |
| Mains supply: |
105– 125 V AC/ 210 – 250 V AC, 50 / 60 Hz |