The sample is exposed to a defined magnetic field within a measuring coil. A magnetic flux is created inside the material. The required current is supplied by a power amplifier. The current is measured by means of a temperature-stable and induction-free precision resistor (shunt) or by field coils. Polarization is determined by measuring the induced voltage, and then conversion and integration by means of a 16 bit processor. Parallel recording of H and J sizes in separate recording systems guarantees absolutely parallel measurement. Errors in measurement due to phase displacement are thereby avoided. The processor calculates all the values from the differentiated and integrated parameters
Quality control of strip steel, punched parts, stators, transformer or ring cores
User commands and control via PC under Windows
Versatile
Easy to operate
Fully digitalized measuring unit
Three coil connectors for different measuring requirements
Module for the measurement of rings, ring strip cores, stacked punched parts etc.
Possibility to extend the modules to include Epstein measurements
MPG Expert software for measurement, presentation and integration into QM systems
Thông số kỹ thuật
| Technical data: |
Electrical Steel Tester C 510 |
| Repeatability: |
0,2 % |
| Comparability of the measuring results: |
IEC 60404-3 |
| Setting accuracy of the nominal value: |
IEC 60404-3 |
| Maximum current: |
± 5 A (± 10 A optional) |
| Maximum voltage: |
± 32 V |
| Coil connectors: |
3 |
| Operating mode: |
PC / Software |
| Dimensions: |
Towergehäuse 300 x 560 x 540 mm
(B x T x H) |
| Power supply: |
220/230 V AC, 50/60 Hz |