General
|
| Power requirements |
| To RPM4-E-DWT: |
12 V dc 1.2 A |
| To AC to DC power supply: |
100 V ac to 240 V ac, 50/60 Hz |
| Temperature range |
| Storage: |
- 20 °C to 70 °C |
| Operating: |
10 °C to 40 °C |
| Relative Humidity |
| Storage: |
0 % to 100 % |
| Operating: |
0 % to 70 % |
| Weight |
| 1 Q-RPT: |
12 kg (26 lb) approximate |
| 2 Q-RPT: |
14 kg (30 lb) approximate |
| Dimensions |
| E-DWT footprint: |
41.4 cm W x 37.1 cm D (16.3 in x 14.6 in) |
| E-DWT height: |
26.9 cm (10.6 in), 33.6 cm (13.2 in) to max variable volume handle height |
Pressure ranges
dependent on
Q-RPT(s) included
in RPM4-E-DWT. |
200 MPa (30,000 psi) maximum with standard variable volume
100 MPa (15,000 psi) maximum with high volume (-HV) variable volume |
| Operating medium |
Delivered filled with oil (di-ethyl-hexyl sebacate) or dry Standard E-DWT-H compatible with Sebacate, silicon oils, propylene glycol, fully fluorinated liquids, partially fluorinated liquids, isopropyl alcohol , and distilled water. Option for Skydrol or mineral oil preparation. |
| Reservoir capacity |
300 cc (18 in3) |
| Variable volume displacement |
| Standard: |
3 cc (0.18 in3), 200 MPa (30,000 psi) maximum |
| High: |
7 cc (0.43 in3), 100 MPa (15,000 psi) maximum |
| Filling and priming pump displacement |
3.7 cc (0.23 in3) |
| TEST pressure connection |
DH500 female.
Note: DH500 is a gland and collar type fitting for 6mm (1/4 in) coned and left hand threaded tubes equivalent to AE F250C, HIP HF4, 9/16-18 UNF, etc... |
| Pressure Limits |
| Maximum Working Pressure: |
Range of RPM4-E-DWT monitor’s Hi Q-RPT 200 MPa (30,000 psi) with standard variable volume.
100 MPa (15,000 psi) with high volume variable volume |
| Maximum priming pump pressure: |
700 kPa (100 psi) |
| Maximum Working Pressure: |
with Lo Q-RPT selected: Range of RPM4-E-DWT monitor’s Lo Q-RPT |
| Communication ports: |
RS232 (COM1, COM2) |