A digital oscilloscope for the analog world PicoScope 4262 PicoTech

Mã sản phẩm: PicoScope 4262 |
Thương hiệu: PicoTech

Giá bán: Liên hệ
Dual channel oscilloscope / spectrum analyzer
16-bit resolution
Low distortion (96 dB SFDR)
Low noise (8.5 µV RMS)
5 MHz bandwidth
16 MS buffer memory
Low-distortion signal generator
Arbitrary waveform generator
Thông tin sản phẩm
Oscilloscope — vertical
Input channels 2
Bandwidth
±20 mV range
±10 mV range
5 MHz
4 MHz
3 MHz
Hardware bandwidth limiter 200 kHz, switchable
Rise time (calculated)
±20 mV range
±10 mV range
70 ns
88 ns
117 ns
Input type Single-ended, BNC connector
Vertical resolution 16 bits
Enhanced vertical resolution 20 bits
Input sensitivity 2 mV/div to 4 V/div (10 vertical divisions)
Input ranges (full scale) ±10 mV to ±20 V in 11 ranges
Input coupling Software-selectable AC/DC
Input characteristics 1 MΩ ±2% || 15 pF ±2 pF
DC accuracy (% of full scale)
±50 mV range
±20 mV range
±10 mV range
±0.25%
±0.5%
±1%
±2%
Overvoltage protection ±50 V (DC + AC peak)
Oscilloscope — horizontal
Maximum sampling rate (real-time) 10 MS/s
Maximum sampling rate
(continuous streaming mode)
Using PicoScope
Using the SDK


10 MS/s
10 MS/s one channel (PC-dependent)
6.7 MS/s two channels (PC-dependent)
Timebase ranges 1 µs/div to 5000 s/div
Buffer memory 16 MS shared between active channels
Streaming buffer memory (PicoScope) 100 MS (shared)
Streaming buffer memory (SDK) Up to available PC memory
Maximum buffer segments (PicoScope) 10,000
Maximum buffer segments (SDK) 32,768
Maximum waveforms per second 9,100 (typical)
Timebase accuracy ±50 ppm
Sample jitter < 10 ps RMS
Dynamic performance (typical)
Crosstalk > 50,000:1
Harmonic distortion –95 dB typical @ 10 kHz, –1 dBfs input
SFDR 96 dB typical @ 10 kHz, –1 dBfs input
Noise 8.5 µV RMS (on most sensitive range)
Bandwidth flatness [+0.25 dB, –3 dB] from DC to full bandwidth
Pulse response < 1% overshoot on all ranges
SẢN PHẨM CÙNG DANH MỤC