Trang chủ Đo Lường - Kiểm Tra Đo lường và hiệu chuẩn tần số, vô tuyến điện tử Thiết bị hãng PicoTech

12 bit oscilloscopes with optional IEPE interface PicoScope 4224 & 4424 PicoTech

Mã sản phẩm: PicoScope 4224 & 4424 |
Thương hiệu: PicoTech

Giá bán: Liên hệ

The Picoscope 4424 and 4224 offer both a high resolution (12 bits) and a high DC accuracy (1%) making them an excellent choice for noise, vibration, precision electronics and mechanical analysis.

Yêu cầu giá tốt: 0984843683, Email: hien@ttech.vn

Chúng tôi cung cấp các thiết bị đo lường sau: Thiết bị hãng PicoTech, Differential picosecond pulse generators PG900 Series PicoTech, Current Data Logger CM3 PicoTech, Platinum Resistance Data Logger PT-104 PicoTech, 8 channel thermocouple data logger USB TC-08 PicoTech, High-resolution data acquisition ADC-20 PicoTech, Multichannel data acquisition (DAQ) PicoLog 1000 Series PicoTech, 25 GHz sampling oscilloscope with TDR, CDR and optical options PicoScope 9300 Series , Microwave test & sub-picosecond timing without high cost PicoScope 9200 Series , PicoScope 6407 high-speed digitizer PicoScope 6407 PicoTech, Deep-memory high-performance USB scopes PicoScope 6000 Series , Flexible Resolution USB Oscilloscope 5000 Series PicoTech, A digital oscilloscope for the analog world PicoScope 4262 PicoTech, 12 bit oscilloscopes with optional IEPE interface PicoScope 4224 & 4424 , High-resolution differential USB oscilloscope PicoScope 4824 PicoTech, High-resolution differential USB oscilloscope PicoScope 4444 PicoTech, PC Oscilloscopes & Mixed Signal Oscilloscopes PicoScope® 3000 Series , USB oscilloscopes & mixed signal oscilloscopes PicoScope 2000 Series PicoTech

Thông tin sản phẩm

Oscilloscope — vertical
Model	PicoScope 4424	PicoScope 4224	PicoScope 4224 IEPE
Model	PicoScope 4424	PicoScope 4224	Passive probe mode	IEPE interface mode
Input channels	4	2
Bandwidth	DC to 20 MHz			1.6 Hz to 20 MHz
Bandwidth	(10 MHz on ±50 mV range)
Rise time (10% to 90%, calculated)	17.5 ns (35 ns on ±50 mV range)
Input type	Single-ended, BNC connector
Vertical resolution	12 bits
Enhanced vertical resolution	16 bits
Input sensitivity	10 mV/div to 20 V/div		10 mV/div to 4 V/div
Input ranges (full scale)	±50 mV to ±100 V in 11 ranges		±50 mV to ±20 V in 9 ranges
Input coupling	Software-selectable AC/DC
Input characteristics	1 MΩ \|\| 22 pF			1 MΩ \|\| 1 nF
DC accuracy	±1%
Overvoltage protection	±200 V (DC + AC peak)		±100 V (DC + AC peak)

Oscilloscope — horizontal
Maximum sampling rate (single shot)	1 or 2 channels: 80 MS/s* 3 or 4 channels: 20 MS/s	80 MS/s
Maximum sampling rate (single shot)	* To achieve the stated sampling rate with two channels, enable one channel from A or B and one from C or D.
Maximum sampling rate (continuous streaming mode)	10 MS/s (Record length limited to 20 MS in PicoScope, unlimited when using the supplied SDK)
Timebase ranges	100 ns/div to 5000 s/div
Buffer memory	32 M samples shared between active channels
Maximum buffer segments	10,000
Timebase accuracy	50 ppm with ≤10 ps jitter

Triggers
Source	Any input channel
Trigger modes	Free run, auto, repeat, single, rapid (segmented memory)
Trigger types	Rising edge, falling edge, edge with hysteresis, pulse width, runt pulse, dropout, logic, windowed
Trigger level	Adjustable over whole of selected voltage range
Trigger sensitivity	Digital triggering provides 1 LSB accuracy up to full bandwidth.
Maximum pre-trigger capture	10 x “per division” timebase setting
Maximum post-trigger delay	50 s