2, 4 drives, 12-48V, up to 5/10A UDMlc ACS Motion Control

Mã sản phẩm: UDMlc |
Thương hiệu: ACS Motion Control

Giá bán: Liên hệ
Universal dual/quad axis Drive Modules for EtherCAT networks
-12Vdc to 48Vdc, up to 5A continuous and 10A peak current
-Digital control for easy setup and diagnostics
Universal drive, supporting any of the following type of motors by software settings only: 2, 3 phase AC Servo / DC brushless with sinusoidal commutation, DC Brush, voice coils, closed and open loop step motors

Yêu Cầu Giá Tốt

Thông tin sản phẩm

The UDMLC is a series of small footprint EtherCAT modules with dual/ quad-axis universal drives for servo, stepper, and voice coil motors with a power range of 10W to 200W. The type of motor is selected by the user and can be set differently for each drive.
 
This product addresses the needs of demanding multi-axis motion applications with limited space, such as moving inspection heads, small manipulators, and table-top motion stages. The miniature size, low weight, and minimal cable interface makes the SPiiPlusUDMLC ideal for mounting remotely on moving axes. It is available in three current levels (cont./peak per axis): 1.25/2.5A, 2.5/5A or 5/10A (dual axis version only), and has inputs for four digital incremental and two absolute encoders.
 
The unit is powered by a 12 to 48Vdc motor bus voltage supply and by a separate 15 to 48Vdc control supply that keeps all logic signals alive during emergency conditions. The UDMLC is panel or din rail mountable.

Servo
A standard comprehensive set of powerful algorithms to enhance accuracy, move & settle time, smooth velocity, stability and robustness.
Advanced PIV cascaded structure
Loop shaping filters
Gain Scheduling
Gantry MIMO control (2.5/5model only)
Dual feedback / loop control
Disturbance rejection control
Optional Servoboost® algorithem that provides better, more consistent servo performance, insensitive to noise and large changes in the system.
 
Drives
Type: digital current control with field oriented control and space vector modulation.
Current ripple frequency: 40 kHz. Current loop sampling rate: 20 kHz.
Programmable Current loop bandwidth: up to 4kHz, will vary with tuning & load parameters.
Commutation type: sinusoidal. Initiation with and without hall sensors.
Switching method: advanced unipolar PWM.
Protection: Over voltage, Motor Phase-to-phase short circuit, motor phase to ground,
short circuit, Over-current, Over-temperature.

SẢN PHẨM CÙNG DANH MỤC