1, 2 drives, 85-265V, up to 7.5/15A UDMpm ACS Motion Control

Mã sản phẩm: UDMpm |
Thương hiệu: ACS Motion Control

Giá bán: Liên hệ
Universal single and dual axis Drive Modules for EtherCAT networks
85 to 265Vac, up to 7.5A continuous and 15A peak current (~1.6kW/3.2kW@230Vac)
Digital control for easy setup and diagnostics
Dual loop with dual feedback per each axis

Yêu Cầu Giá Tốt

Thông tin sản phẩm

The UDMPM is a line of EtherCAT universal single & dual axis economical drives for AC servo / DC Brushless, AC Induction, and DC brush motors.

The UDMPM operates as an EtherCAT node under any SPiiPlus EtherCAT master Controller including the PC based SPiiPlusSC 
Soft Controller. It is designed to address cost sensitive applications requiring better move & settle, smooth velocity and stand still jitter performance with power of up to 1.6kW/3.2kW (continuous/peak) per axis.
The UDMPM is offered with two current levels: 5A/10A (cont./peak) and 7.5A/15A.
Optional Safe Torque Off (STO) module cuts the power to the motor without removal of the power source to comply with SIL-3 and PLe safety levels.

The UDMPM is powered by a single phase 85 to 230Vac and by a separate 24Vdc control supply that keeps all low voltage signals alive during emergency conditions.
 
Servo
A standard comprehensive set of powerful algorithms to enhance accuracy, move & settle
time, smooth velocity, stability and robustness.
Advanced PIV cascaded structure
Loop shaping filters
Gain Scheduling
Gantry MIMO control
Dual feedback / loop control
Disturbance rejection control
 
Drives
Type: digital current control with field oriented control and space vector modulation.
Current ripple frequency: 40 kHz Current loop sampling rate: 20 kHz
Programmable Current loop bandwidth: up to 4kHz, will vary with tuning & load parameters.
Commutation type: sinusoidal. Initiation with and without hall sensors
Switching method: advanced unipolar PWM
Protection: Over voltage, Phase-to-phase short circuit, Short to ground, Over current, Over temperature

Supply
The module is fed by two power sources. A motor AC supply and a 24Vdc control supply. During emergency conditions there is no need to remove the 24Vdc control supply.

SẢN PHẨM CÙNG DANH MỤC
@!-/#Chào mỪng1
@!-/#Chào mỪng1