Vibration Analyzer & Data Collector DigivibeMX M20 System Erbessd instruments

Mã sản phẩm: DigivibeMX M20 System |
Thương hiệu: Erbessd instruments

Giá bán: Liên hệ
DigivibeMX® M20 System is the Vibration analyzer with the most advanced functions in the market. With its intuitive interface you can make simple Vibration analysis as well as complex 3D ODS vibration simulations, DigivibeMX® M20 is your best tool for predictive analysis and diagnosis for your machinery.

Yêu Cầu Giá Tốt

Thông tin sản phẩm

DigivibeMX® M20 includes the following vibration analysis tools:


3D Waterfalls

3D ODS Simulations
Routes Analysis
Barcode creator and reader
Automatic reports 2
Color-based database
Colored Indicators for general Vibration and Bearing problems
Tendency curves with tendency analyzer
Machinery condition statistics
Database compatibility and synchronization

3D Waterfall
FFT
Phase
Orbits
Bode
Cross Power Spectrum
Frequency Response
Coherence function
Spectrograph
Cross by Zero frequency
3D Waterfall
FFT
Phase
Orbits
Bode
Cross Power Spectrum
Frequency Response
Coherence function
Spectrograph
Cross by Zero frequency3D Waterfall
FFT
Phase
Orbits
Bode
Cross Power Spectrum
Frequency Response
Coherence function
Spectrograph
Cross by Zero frequency


2-Channel Interface
  • 4-pin LEMO® Connectors
    (Ch 1-A, Ch 1-B, Ch 2/Op & USB)
  • Active Plane Indicator
    (LED 1-A & LED 1-B)
  • Channel Auto Switching*
    *Only with DigivibeMX® 10
  • IP 67 Protection grade
  • 4-pin LEMO® to USB Cable (1m/3ft)
  • Weight: 153g
  • Dimensions: 79 x 70 x 24 mm
  • Cables
  • 1 Shielded monoaxial cable with 5-pin LEMO® connectors for Optical Sensor and Calibrator (2m/6ft)
  • 2 Shielded monoaxial 5-pin LEMO® to 2-pin cables for accelerometers (2m/6ft)
  • 2 Accelerometers
  • Dinamyc Impact Shock: 50g peak (max shock 5000g)
  • Freq. response (+/- 3dB): 0.32 - 135000 Hz
  • Freq. response (+/- 5%): 2 - 10000 Hz
  • Sensitivity: 100 mV/g +/- 10%
  • Transverse sensitivity: < 5%
  • Power supply: 18-30 V / 3-8 mA
  • Short-circuit protection
  • Operation temp.: −10 - 50 °C
  • Protection grade: IP 65
  • Impact resistance: IEC 60028-27
  • Standard 2-Pin MIL connector
  • Includes 2-Pin to 5-Pin LEMO® cable and Magnetic Base
  • Weight 50g
  • Stainless steel body
  • 1 Laser Tachometer
  • Analogic output
  • Range: 1 - 5000 Hz
  • Power supply: 5 V
  • Current: 20 - 30 mA
  • Voltage drop: <0.4 V
  • Short circuit protection
  • Reverse current protection
  • Over-Voltage protection: 15V for 1 minute
  • Operating temp: −10 - 50 °C
  • Storing temp: −40 - 85 °C
  • Protection grade: IP 67, III
  • Impact Resistance: IEC 60028-27
  • Operation Distance: Up to 15 m
  • Weight 60 g
  • Designed in Nylamid
  • 1 Calibrator
    Soft Case
    Installation CD
    & User Manual
    See system requirements below

    SẢN PHẨM CÙNG DANH MỤC