Tủ sấy DZF-6020-HT400P MTI Corporation

Mã sản phẩm: DZF-6020-HT400P |
Thương hiệu: MTI Corporation

Giá bán: Liên hệ

Tủ sấy
Model: DZF-6020-HT400P
Hãng: MTI Corporation

Yêu Cầu Giá Tốt

Thông tin sản phẩm
- Chamber and Door : 
   + The chamber is structured by Stainless Steel (1Cr18Ni9Ti)
   + Inner Chamber size: 300mm(L) x 300mm(W) x 280mm(H); (12 x 12 x 11", 25 Liter)
   + A good vacuum seal is achieved by silicone door gasket and positive latch door
   + 2 stainless steel shelves are included to facilitate processing efficiency.
   + A closeable 4"x4" quartz window is built on the front door to allow you observe samples inside clearly, and keep chamber temperature more uniform when close cover
   + Door flange with water cooling jacket to allow silicone sealing O-ring using for long tine
   + One Digital Temperature Controlled Recirculating Water Chiller is included for water cooling
- Working Voltage : 208 - 240VAC (20Amps circuit breaker is required)
- Power Consumption : 1600 W
- Recommended Heating Rates : 
   + 5 ºC/min: 0ºC - 100ºC
   + 5 ºC/min: 100ºC - 200ºC
   + 5 ºC/min: 200ºC - 300ºC
   + 3.4 ºC/min: 300ºC - 400ºC
- Thermocouple :  K type
- Working Temperature : RT ~400°C for continuous
- Temperature Controller : 
   + 30 segments programmable temp. controller
   + Built-in over-temperature protection
   + Temperature uniformity: +/-5°C @ 100°C, 25" Hg at center 6"x6" area only 
   + PID precise temperature control
   + Temperature Stability: +/-1°C 
   + Built in RS485 communication port is installed for PC connection.  Please order PC software (EQ-MTS02) and communication chip for  PC control function at extra cost.
- Vacuum Level : 
   + Vacuumn level of oven after pumping < 133pa (1 torr)
   + One Rotary Vane Vacuum Pump with Exhaust Filter, Bellows & KF-D25 Inlet is included
- Float Meter : 200~2000ml/min 
- Fittings & Valve : 
   + Gas inlet: 1/4" stainless steel fitting port with needle valve
   + Vacuum Port: KF-25
   + Water Cooling Inlet & Outlet
   + 16 L/ min water cooling is required
   + Φ6.35mm water cooling pipe
- Dimensions : 700mm(L) x 500mm(W) x 525mm(H)
- Shipping Weight & Dimensions : 48"(L) x 40"(W) x 31"(H); 320 Lbs after crating
SẢN PHẨM CÙNG DANH MỤC