Thiết bị xoay đo lực xoắn, momen, Cedar, NTS-6-S1/2/5/10/20, ROTATE TORQUE TESTER, Cedar, NTS-6-S1/2/5/10/20

Mã sản phẩm: Cedar- NTS-6-S1/2/5/10/20 |
Thương hiệu:

Giá bán: Liên hệ

Thiết bị xoay đo lực xoắn, momen, Cedar, NTS-6-S1/2/5/10/20, ROTATE TORQUE TESTER, Cedar, NTS-6-S1/2/5/10/20

Model: Cedar- NTS-6-S1/2/5/10/20


Hãng SX: CEDAR - NHẬT

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Thiết bị xoay đo lực xoắn, momen, Cedar, NTS-6-S1/2/5/10/20, ROTATE TORQUE TESTER, Cedar, NTS-6-S1/2/5/10/20

Model: Cedar- NTS-6-S1/2/5/10/20


Hãng SX: CEDAR - NHẬT

1. Name of product: Rotate torque tester

2. Model: NTS-6-S1/2/5/10/20

3. Brand: Cedar

4. Specification:



Specification NTS-6
S-1 S-2 S-5 S-10 S-20
Measuring range  
(at the time of Track)
3.0~100
mN・m
3.0~200
mN・m
0.030~0.5
N・m
0.030~1
N・m
0.030~2
N・m
Accuracy ±1 %
2 mN・m or Less ±3dijit 0.2 N・m or Less ±3dijit
Rotational frequency
(at the time of no-load)
85rpm 25rpm 13rpm 18rpm 18rpm
Display The 4 figures digital display of LCD
The measurement direction CW-CCW Possible (right and left)   It rotates by the motor.
Measuring
mode
Peak operation mode (PP):
Display the maximum under measurement .
Truck mode (GO):
Always display the load torque which has started.
RG mode (PD):
Carry out the data output of the load torque every  1/ 87 seconds.
Measurement start time Time after beginning rotation until it starts measurement is set up
(0.1 - 1 second).
Torque judging It is in measuring range and a setup of a maximum value and a minimum value is possible.[ O.K. In the Set point ] Lamp lighting  :  [ NG Outside the Set point ] Error buzzer
External input and output Signal output (open collector): O.K., NG
Data output: ASCII Format (baud rate9600), External start switch input
Power supply AC100V~240V
bit size φ 4 HEX6.35
Outside size indicator 165(W)×110(D)×58(H)
Outside size detector φ28×155 φ37×195 φ40×235

Accessories
(one piece each)

Inspection report, Proofreading certificate, Traceability system figure

SẢN PHẨM CÙNG DANH MỤC