Specification
|
DIS-IP05
|
DIS-IP5
|
DIS-IP50
|
DIS-IP200
|
DIS-IP500
|
Measuring range
(at time of Track)
|
2.0~500 mN・m
0.20~50 kgf・cm
0.20~45 lbf・in
|
0.020~5 N・m
0.20~50 kgf・cm
0.20~45 lbf・in
|
0.20~50 N・m
2.0~500 kgf・cm
2.0~450 lbf・in
|
2.0~200 N・m
20~2000 kgf・cm
20~1740 lbf・in
|
2.0~500 N・m
20~5000 kgf・cm
20~4500 lbf・in
|
Accuracy
|
±0.5% (499 or less digit±3digit)
|
Display
|
The 4 figures digital display of LCD
|
The measurement direction
|
CW-CCW (right and left)
|
Measuring
mode
|
P-P Peak
|
Peak load value hold.
|
T-R Track
|
Indication of real time torque value.
|
P-D Peak down
|
Holding Load Value at the moment to change from upward to downword
|
C Real-time output
|
Load torque value is outputted every about1/ 180 second .
|
Decision
function
|
Setting of torque value
|
A Maximum and a minimum value are in a measuring range, and a setup is possible.
Can confirm the set value by the buzzer sound or LED.
|
The Maximum, the minimum, and the average value
|
The maximum, the minimum value, and average value of the saved data
|
Automatic Clearance
|
Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
|
One-touch zero
|
Easy Zero-Adjustment with pressing CLEAR button
|
Data spec.
|
Data transfer
|
ASCII fomat (Baud rate :19200)
|
Data memory
|
800 data
|
Power supply
|
Ni-Cd chargeable battery 1.2V×5cells 700mAh
|
Auto power save
|
10 minutes no use, automatically switch off.
|
Charging time
|
about 3 hours
|
Continunous working time
|
12 hours
|
Meter outside type dimension
|
100(W) x105(D) x40 (H) (It does not contain by the projection thing.)
|
Weight
|
Meter part 520g
|
Code length
|
Standard 1m (there are automatic machines no less than 4m as an option.)
|
Accessories
(one piece each)
|
AC/DC adaptor
|
An inspection report, a proofreading certificate, a traceability system figure
|