Specification |
DI-4B-25 |
Measuring range |
0.30~25 N・m 3.0~250 kgf・cm 3.0~220 lbf・in |
Operative Measuring Range
at P-D Mode |
0.70 - 25 N.m 7.0 - 250 kgf.cm 7.0 - 220 lbf.in |
Accuracy |
± 0.5% (in case of reading 499 or less = last digit +/- 3 reading) |
Display |
Torque Meter |
LED Digital Display, 4 digits |
Blow Counter |
LED Digital Display, 2 digits (Displayed only in P-P mode) |
Measureing Direction |
CW, CCW selectable with a Switch |
M'ment Mode |
P-P Peak |
Holding Peak Load Value |
T-R Track |
Showing Real time torque value ( Used for Zero-Adjustment ) |
P-D Peak down |
Holding Load Value at the moment to change from upward to downword |
Blow Counter |
Count Range |
Zero to 99 blow |
Count Time |
0.1 - 9.9 seconds |
Automatic Clearance |
Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance |
One-touch-Zero Clearance |
Easy Zero-Adjustment with pressing CLEAR button |
Data output |
ASCII format USB Btype (Baud rate: 19200) |
Power Supply |
Battery |
Ni-Cd Chargeable Battery 1.2V x 5 cells (700mAh) |
Automatic PW off |
Automatically power off after 5 minutes left without operation |
Charging time |
Within 3 hours |
Continunous working time |
8 hours |
Battery Life Time |
Chargeable more than 300 times |
Weight |
2.1kg |
Dimension |
150(W) x220(D) x74 (H) |
Accessories
(one piece each)
|
Bit Socket ( 6.35 HEX - Subtense 17mm ) |
Measuring Joint : Hard Type (M10) & Soft Type (M10) |
Socket for Wrenches ( Subtense 17mm ) |
Dedicated AC/DC Adaptor (Charger), 230VAC or 120VAC |
Exclusive receipt case |
An inspection report, a proofreading certificate,
traceability system figure |