- The spring testing machine WG 3/3 has a two-pillar guide with 4 bearing points. The path is fed in by a lever, the fine tuning is carried out by a separate device.
- Two length stops are provided (optional), which can be switched over with a mechanical slide. The device has a data output for the connection to a personal computer Windows 95/98/NT/ XP/ 7.
- The measurement values of the spring testing machine are calculated in a continuous process, and can be traced at any time via the saved spring core line. For the spring testing machine, a commercially available printer with LPTCentronics interface can be used for protocol creation.
- The testing machine can optionally be equipped with 10 N, 50 N, 100 N, 200 N or 500 N sensor. The lengthwise measurement is carried out using an incremental scale and is shown in 5 digits on the display. Resolution 0.01 mm. For compression springs, a lengthwise infeed (optional) is possible up to 100mm, and for tension springs up to 150mm. The measurement plate, which can be adjusted to plane parallelism ,has a diameter of 45 mm.