| Input section |
| Applicable sensor |
FT-0501, IP-292/296, IP-3000A/3100, VP-202/1220, OM-1500/1200
Constant Current Line Drive sensors, microphones, accelerometers and so on. |
| Measurement section |
| Measurement mode |
1．Steady rotation measurement mode
・Frequency range: 500 Hz, 2 kHz, 10 kHz
・Resolution ＝Frequency range ÷ 12800 × 60 ÷set pulse count
2．Rotation acceleration/deceleration measurement mode
・Frequency range: 250 Hz, 500 Hz, 2 kHz
・Resolution＝Frequency range ÷ 6400 × 60 ÷set pulse count
|
| Rotating direction acknowledgment |
Available when FT-0501 is in use. |
| Measurement accuracy |
±2 x rotating speed resolution ±1 count |
| Averaging processing |
Moving average processing, allowable count: OFF, 2, 4, 8, 16 |
| Filter function |
Can be set voluntary (Specifying each one of upper and lower rotating speeds.) |
| Display section |
| Display update time |
0.5 ±0.2 second |
| Measurement display range |
0 to 999,999 r/min（0 to 10,000 Hz） |
| Output section |
| Analog output voltage range |
0 to 10 V/0 to F.S.
Rotational speed can be specified voluntary at 10 V output. |
| Analog output update time |
Steady rotation measurement mode: 500 ms or less
Rotation acceleration/deceleration mode: 250 ms or less |
| Sensor signal output for monitoring |
Sensor signal output for monitoring
(The output can be selectable from analog or monitor output.) |
| Comparator output |
Upper/lower-limit determination, rotating direction acknowledgment, OK determination
Output method: semiconductor relay (3 circuits are built-in.) |
| Pulse output |
Output the frequency equivalent to the displayed rotational speed x set P/R
（Hi: 4.5 V or more, Lo: 1 V or more） |
| External interface |
RS-232C, External command input connector, Ethernet (option) |
| Memory section |
| Condition memory |
Saving 3 kinds of setting conditions. |
| General specifications |
| Power requirement |
100 to 240 VAC（50/60 Hz） |
| Power consumption |
32 A or less |
| Operating temperature range |
0 to ＋40 °C |
| Storage temperature range |
-10 to ＋55 °C |
| Outer dimensions |
144(W) × 72(H) × 180(D) mm |
| Weight |
Approx. 1.2 kg |
| Accessories |
Panel mounting fixture, stand foot, rubber foot, connector (D-SUB <15-pin, plug>), Power cable (3P-3P, 1.9-m) .......... (1 pc. for each) |
| Option |
AX-5022 RS-232C cable
FT-0100 Analog output cabel(1.5m R03PB3M-BNC245)
FT-0110 Pulse output cabel(1.5m D-SUB15PIN-BNC245)
FT-0251 Ethernet communication function (RS-232C function cannot be used when Ethernet option is equipped.)
|