Combined with a wide load range, this type of meter is used either for highly precise measurement of highly variable flow rates or as an alternative to the classic combination meters, with main and secondary meter.
In contrast to Woltman meters, the ETK-N/ETK-M does not require an inlet zone, since, as a single-jet meter, it is insensitive to swirling flows. Approved for horizontal installation position, this meter type is very flexible to use and can be an alternative in almost all areas of application of the classic combination meter.
| Measuring Principle |
Single-Jet Meters
|
| Length without connectors |
270 mm
300 mm
350 mm
360 mm
|
| Housing Material |
Cast Iron
|
| Register |
Dry Dial
|
| Nominal Flow Q3 (≈ Qn) |
Q3=25 (≈ Qn 15)
Q3=40 (≈ Qn 25)
Q3=63 (≈ Qn 40)
Q3=100 (≈ Qn 60)
|
| Nominal Diameter DN (mm) |
DN 50
DN 65
DN 80
DN 100
|
| Temperature |
Cold water up to 50° C
|
| Specified Units on Display |
Cubik Meters (m³)
|
| Metrological Class horizontal (max.) |
C |