Specification |
DIW-15 |
DIW-20 |
DIW-75 |
DIW-120 |
Measuring range N・m
(at the time of Track) |
0.20 - 15 N・m |
0.20 - 20 N・m |
0.20 - 75 N・m |
2.0 - 120 N・m |
2.0~150 kgf・cm |
2.0~200 kgf・cm |
2.0~750 kgf・cm |
20~1200 kgf・cm |
2.0~130 lbf・in |
2.0~174 lbf・in |
2.0~650 lbf・in |
20~1040 lbf・in |
Accuracy |
±0.5% (F/S)
(199 or less digit±1digit) |
±0.5% (F/S)
(499 or less digit±3digit) |
±0.5% (F/S)
(199 or less digit±1digit) |
Display |
The 4 figures digital display of LCD |
The measurement direction |
CW-CCW (right and left) |
Measuring
mode |
P-P Peak |
Holding Peak Load Value |
T-R Track |
Showing Real time torque value ( Used for Zero-Adjustment ) |
P-D Peak down |
Holding Load Value at the moment to change from upward to downword |
C Real-time output |
Load torque value is outputted every about1/ 160 second |
Decision
function |
Setting of torque value |
Programmable High and Low setpoints with both audible beep and Green/ Red LED indicator for uniform torque tightening or GO/NO GO testing |
The Maximum, the minimum, and the average value |
The data number, the maximum, the minimum value, and the average value of memory data are displayed. |
Data spec. |
Data transfer |
ASCII format (Baud rate : 19200) |
Data memory |
800 data |
A setup of the number of counts |
One to 99 count (count in a direction with a bundle) |
Auto power save |
10 minutes no use, automatically switch off. |
Charging time |
From empty - less than 5hours |
Continunous working time |
12 hours |
Outside size |
φ34(grip)×236(L) |
φ34(grip)×235(L) |
φ34(grip)×320(L) |
φ34(grip)×445(L) |
Weight (about) |
430g |
470g |
620g |
830g |
Socket engagement |
6.35 square, including steel ball |
9.5 square, including steel ball |
12.7 square, including steel ball |
Attachment |
- |
One-way socket |
Accessories
(one piece each) |
AC/DC adaptor |
An inspection report, a proofreading certificate, a traceability system figure |