Specification |
DIS-RL05 |
DIS-RL2 |
DIS-RL6 |
Measuring range |
2.0~500 mN・m
0.020~5 kgf・cm
0.020~4.5 lbf・in |
0.010~2 N・m
0.10~20 kgf・cm
0.10~17.4 lbf・in |
0.10~6 N・m
1.0~60 kgf・cm
1.0~54lbf・in |
Accuracy |
±0.5% (or less 499±3digit) |
±0.5% (or less 199±1digit) |
Display |
The 4 figures digital display of LCD |
The measurement direction |
CW-CCW (right and left) |
Measuring
mode |
P-P Peak |
Peak load value hold. |
T-R Track |
Indication of real time torque value. |
P-D Peak down |
Holding Load Value at the moment to change from upward to downword |
C Real-time output |
Load torque value is outputted every about1/ 180 second by RS232C. |
Decision
function |
Setting of torque value |
A top and a minimum value are in a measuring range, and a setup is possible.
Can confirm the set value by the buzzer sound or LED. |
The Maximum, the minimum, and the average value |
The maximum, the minimum value, and average value of the saved data |
clearance |
It is a display clearance in set-up time. (0.5 - 3.0 sec) |
One-touch zero |
A clear button is pushed and it is a zero. data output. |
Data spec. |
Data transfer |
ASCII format (Baud rate : 19200) |
Data memory |
800 data stored |
Power supply |
Ni-Cd chargeable battery 1.2V×4cells 450mAh |
Auto power save |
10 minutes no use, automatically switch off. |
Charging time |
about 3hours |
Continunous working time |
10 hours |
Meter outside type dimension |
100(W) x105(D) x40 (H) (It does not contain by the projection thing.) |
Weight |
Meter part 520g |
Bit/Socket part |
Φ4 |
HEX 6.35 |
Accessories
(one piece each)
|
Φ4 bits
(+) ♯0/♯1 |
6.35HEX bits
(+) ♯1/♯2 |
Receipt case |
AC/DC adaptor |
An inspection report, a proofreading certificate, a traceability system figure |