Solids flow metering MaxxFlow HTC SWR Engineering

Mã sản phẩm: MaxxFlow HTC |
Thương hiệu: SWR Engineering

Giá bán: Liên hệ
The MaxxFlow HTC is specially developed for the flow measurement of dry bulk solids during high-volume throughput. Due to its completely open profile and its low installation height, the MaxxFlow HTC is especially suitable in situation in which it was previously only possible to use complicated or expensive mechanical solutions, e. g. impact plates or measuring chutes.

Yêu Cầu Giá Tốt

Thông tin sản phẩm
Sensor Housing Steel St 52, powder-coated (optional stainless steel 1.4571 NW 100/150/200 mm, flange according EN 1092-1 / PN 10
  Inner pipe Ceramic AL2O3
  Protection category IP 65
  Operating temperature Sensor electronic: 
0 ... + 60 °C
Sensor pipe:
- 20 ... + 120 °C
  Max. working pressure 1 bar, optional 10 bar
  Working frequency 88 kHz
  Transmitting power Max. 2 mW
  Weight Depending on model
  Accuracy ± 3 % (based on end of measuring range and calibrated material)
     
Transmitter (Field housing) Power supply 110/240 V AC, 50 Hz, optional 24 V DC
  Power comsumption 20 W / 24 VA
  Operating temperature - 10... + 45 °C
  Dimensions 258 x 237 x 174 mm (W x H x D)
  Weight Approx. 2.5 kg
     
Additional data RS 485 interface ModBus
  Terminal clamp wire size 0.2 - 2.5 mm_ [AWG 24-14]
  Current output signal 2 x 4 ... 20 mA (0 ... 20 mA), load < 500 Ohm
  Serial output RS 485, ModBus protocol
  Data backup Flash memory
  Cable glands 3 x M 16 (4.5 - 10 mm Ø)
SẢN PHẨM CÙNG DANH MỤC