| Dimensions |
without handles |
445 mm × 176 mm × 307 mm
(17.5 in × 6.9 in × 12.1 in) |
| Weight |
|
12.0 kg (26.5 lb) |
| R&S®VTE base unit |
| Dimensions |
without handles |
232 mm × 132 mm × 307 mm (3 HU)
(9.1 in × 5.2 in × 12 in) |
| Weight |
|
6 kg (13.28 lb) |
| R&S®VTS base unit |
| Dimensions |
without handles |
229 mm × 544 mm × 406 mm
(9.02 in × 21.42 in × 15.98 in) |
| Weight |
|
4 kg (8.81 lb) |
| MHL extension |
| R&S®VT-B2350 MHL RX/TX |
| Interface |
|
MHL in (HDMI type A), MHL out (micro USB), HDMI out (type A, auxiliary) |
| MHL standard |
|
MHL 1.3/2.1 |
| MHL analysis |
| Basic data |
|
video formats and timing (24-bit mode), audio formats and sampling rates, HDCP parameters, CBUS lock status |
| CEA-861E InfoFrames |
|
AVI, audio, SPD and MPEG InfoFrame interpretation |
| Decoding |
|
on-screen video, internal audio playout |
| MHL generation |
| Patterns |
|
static test patterns (all MHL video resolutions; 24-bit mode/PackedPixel mode) |
| Audio |
|
test tones (all PCM audio formats and sampling rates) |
| EDID reader |
|
display of EDID data |
| R&S®VT-B2351 MHL RX PackedPixel |
| Interface |
|
MHL in (HDMI type A),
HDMI out (type A, auxiliary) |
| MHL standard |
|
MHL 1.3/2.1 |
| MHL analysis |
| Basic data |
|
video formats and timing (PackedPixel mode), audio formats and sampling rates, HDCP parameters, CBUS lock status |
| CEA-861E InfoFrames |
|
AVI, audio, SPD and MPEG InfoFrame interpretation |
| Decoding |
|
on-screen video, internal audio playout |
| R&S®VT-K355 MHL CTS sink test |
| MHL CTS sink tests |
in line with CTS 1.3/2.1 section 4.2 |
4.2.1 to 4.2.3, 4.2.5 to 4.2.10 |
| MHL CTS dongle tests |
in line with CTS 1.3/2.1 section 5.2 |
5.2.1 to 5.2.3, 5.2.5 to 5.2.10 |
| R&S®VT-K2355 MHL CTS source test |
| |
in line with CTS 1.3/2.1 section 3.2 |
3.2.2 to 3.2.4, 3.2.6 to 3.2.10 |
| HDMI extension |
| R&S®VT-B2360 HDMI RX 225 MHz, R&S®VT-B2361 HDMI RX 300 MHz |
| Interface |
|
HDMI in (HDMI Type A), HDMI out (Aux), HEAC (RJ-45), S/PDIF in (otpical) |
| HDMI standard |
|
HDMI 1.4 |
| HDMI analysis |
| Basic data |
|
video formats and timing up to 4k, audio formats and sampling rates, HDCP parameters |
| CEA-861E InfoFrames |
|
AVI, audio, SPD and MPEG InfoFrame interpretation |
| Decoding |
|
on-screen video, internal audio playout |
| R&S®VT-K2365 HDMI CTS source test |
in line with HDMI CTS 1.4 |
7-1, 7-16 to 7-19, 7-23 to 7-40 |
| R&S®VT-B360 HDMI TX 300 MHz |
| Interface |
|
4x HDMI out, HEC (RJ-45); |
| High-definition multimedia interface standard |
|
HDMI 1.4b |
| HDMI generator |
| Basic data |
|
video formats (HDMI, DVI), audio generator, HDCP parameter, HotPlug status |
| Pixel clock |
|
up to 297 MHz |
| Patterns |
|
static test patterns (up to 4k) |
| Audio generator |
|
test tones
(all PCM audio formats and sampling rates) |
| CEA-861E InfoFrames |
|
AVI, audio and HDMI vendor-specific InfoFrame |
| Audio return channel analysis on port 1 |
|
R&S®VT-K2150 audio analysis |
| Analog A/V extension |
| R&S®VT-B2370 analog AV RX |
| Interfaces |
|
composite (1 × BNC)
component (6 × BNC)
audio L/R (2 × BNC)
video H-Sync/V-Sync |
| Analysis |
|
requires complementary media content analysis option(s) |
| R&S®VT-K2371 component support |
|
activate component inputs |
| Complementary media analysis options |
| R&S®VT-K2100 video analysis |
| Videoscope |
|
single, parade and overlay waveform view; marker and delta marker for timing and level measurements |
| Vectorscope |
|
color measurements, RGB pixel values |
| R&S®VT-K2101 video measurements |
|
automated signal parameter measurements of noise, frequency response, linear and non-linear distortions for composite and component signals |
| R&S®VT-K2110 A/V inspection |
|
still-picture and moving-picture match detection |
| R&S®VT-K2111 A/V distortion analysis |
|
PSNR, SSIM, picture failure point, picture freeze, black frame, dropped frames, pixel errors |
| R&S®VT-K2150 audio analysis |
|
level, THD+N, frequency response, signal to noise ratio, crosstalk, interchannel phase |
| Modulator extensions |
| R&S®VT-B600 broadcast TX modulator |
| RF characteristics |
| Frequency range |
base unit
with R&S®VT-K3083 option |
30 MHz to 900 MHz
30 MHz to 3000 MHz |
| Frequency setting resolution |
|
1 Hz |
| Level setting range |
base unit;
with R&S®VT-K3084 option |
–31.5 dBm to 0 dBm RMS for DVB-T
–110 dBm to 0 dBm RMS for DVB-T |
| MER |
for OFDM modulation |
> 40 dB |
| Modulation systems |
| Terrestrial TV and mobile TV |
|
DVB-T2, DVB-T, DVB-H, DTMB, CMMB, T-DMB, ISDB-T, ISDB-TB, ISDB-T 1 seg., ATSC/8VSB, ATSC-M/H, MediaFLO™ |
| Cable TV |
|
DVB-C2, DVB-C, ISDB-C, J.83/B |
| Satellite TV |
|
DVB-S2, DVB-S, DIRECTV |
| Analog TV |
|
B/G, D/K, I, M/N, L |
| Audio broadcasting |
|
DAB, DAB+, ISDB-TSB, AM, FM mono, FM stereo with RDS |
| Additional functionality |
| Transport stream player |
file format |
TRP, T10, ETI, FLO, MFS, PMS, BIN |
| Audio/video generator |
file format |
Rohde & Schwarz proprietary |
| AWGN |
signal-to-noise ratio (SNR) |
–30 dB to +60 dB |