Rohde-schwarz - Vector Signal Generator SMBV100A

Mã sản phẩm: SMBV100A |
Thương hiệu: Rohde - Schwarz

Giá bán: Liên hệ

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Key Facts

  • Frequency options from 9 kHz to 3.2 GHz/6 GHz
  • Optional baseband generator with realtime coder and arbitrary waveform generator for maximum flexibility
  • Optional ARB-only baseband generators as cost-saving alternatives
  • Support of 3GPP LTE FDD and TDD, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, WLAN, WiMAX and all other important digital standards
  • Fully fledged GNSS simulator with GPS, Glonass and Galileo
  • RF bandwidth of up to 160 MHz with internal baseband generator
  • I/Q modulator with 528 MHz RF bandwidth
  • Optimized for high production throughput
  • Prepared for aerospace and defense applications
  • Low cost of ownership due to simple service concept


Brief Description

The R&S®SMBV100A offers excellent RF performance along with very high output level and short setting times. At the same time, the R&S®SMBV100A can be equipped with an internal baseband generator to allow generation of a number of digital standards (e.g.LTE, LTE-Advanced, IEEE802.11ac, GNSS). The wide frequency range from 9 kHz to 6 GHz covers all of the important bands for digital modulation.



Specifications


Frequency
Range R&S®SMBV-B103  
  CW mode 9 kHz to 3.2 GHz
  I/Q mode 1 MHz to 3.2 GHz
  R&S®SMBV-B106  
  CW mode 9 kHz to 6 GHz
  I/Q mode 1 MHz to 6 GHz
Setting time SCPI mode, ALC state ON, CW mode <3 ms
  SCPI mode, ALC state ON, I/Q mode <5 ms
  SCPI mode, ALC state Table <2.5 ms
  SCPI mode, ALC state S&H <7 ms
  List mode <1 ms
Level
Maximum output power 1 MHz < f = 6 GHz >+18 dBm (PEP)
Absolute level error 200 kHz < f = 3 GHz <0.5 dB
Additional level error with ALC OFF, S&H This mode is used with I/Q modulation and pulse modulation. <0.25 dB
Output impedance VSWR in 50 Ω system 200 kHz < f = 6 GHz <1.8
Setting time SCPI mode, ALC state ON, CW mode <2.5 ms
  SCPI mode, ALC state ON, I/Q mode <5 ms
  SCPI mode, ALC state Table <2.5 ms
  SCPI mode, ALC state S&H <7 ms
  List mode <1 ms
Reverse power 1 MHz < f = 1 GHz 50 W
  1 GHz < f = 2 GHz 25 W
  2 GHz < f = 6 GHz 10 W
Spectral purity
Harmonics f > 1 MHz; CW, level = 8 dBm <–30 dBc
Nonharmonics CW, level > –10 dBm, >10 kHz carrier offset, f = 1500 MHz <–70 dBc
(<–84 dBc typ.)
SSB phase noise 20 kHz carrier offset, 1 Hz measurement bandwidth, CW  
  f = 100 MHz <–141 dBc
(–147 dBc typ.)
  f = 1 GHz <–122 dBc
(–127 dBc typ.)
  f = 6 GHz <–106 dBc
(–112 dBc typ.)
Wideband noise attenuator mode AUTO for level > 5 dBm, >10 MHz carrier offset, 1 Hz measurement bandwidth, CW <–142 dBc
Supported analog modulation modes
Amplitude modulation   standard
Frequency/phase modulation   standard
Maximum FM deviation f > 3 GHz 16 MHz
Maximum φM f > 3 GHz 160 rad
Pulse modulation   optional,
with R&S®SMBV-K22
On/off ratio   >80 dB
Rise/fall time 10 % to 90 % of RF amplitude <20 ns, 4 ns (typ.)
Minimum pulse width using the optional
R&S®SMBV-K23 pulse generator
10 ns
I/Q modulation
Supported systems
(with additional options)
R&S®SMBV-B10 baseband generator required GSM/EDGE/EDGE evolution, 3GPP FDD incl. HSPA/HSPA+,TD-SCDMA, CDMA2000®, 1×EV-DO, EUTRA/ LTE, WiMAX IEEE 802.16-2004, Cor1-2005, 802.16e-2005 and 802.16Rev2/D3 , WLAN IEEE 802.11a/b/g/n/ac, NFC A/B/F, Bluetooth®, GPS, Glonass, Galileo, HD Radio™3), XM Radio, Sirius Radio, FM Stereo / RDS, DAB / T-DMB, DVB-H/DVB-T, Tetra Release 2, multicarrier CW
Realtime custom digital modulation R&S®SMBV-B10 baseband generator required ASK, FSK, BPSK, QPSK, QPSK 45° offset, OQPSK, p/4-QPSK, p/2-DBPSK, p/4-DQPSK, p/8-D8PSK, 8PSK, 8PSK EDGE, 16QAM, 32QAM, 64QAM, 256QAM, 1024QAM
I/Q modulator bandwidth internal 60 MHz, 120 MHz or 160 MHz, depending on baseband option
  external >500 MHz
Maximum waveform length 32 Msample
  with R&S®SMBV-K511 option 256 Msample
  with R&S®SMBV-K512 option 1 Gsample
DAC resolution    
ACLR WCDMA 3GPP FDD, TM 1/64 69 dBc (typ.)
EVM WCDMA 3GPP FDD, TM 1/64 0.4 % (meas.)
  WLAN IEEE 802.11 ac, 160 MHz 0.44 % (meas.)
  EUTRA/LTE 0.4 % (meas.)
Connectivity
Remote control   IEC/IEEE, Ethernet (LAN), USB
Peripherals   USB 2.0

2) PEP = peak envelope power.

3) HD RadioTM is a proprietary trademark of iBiquity Digital Corp.

SẢN PHẨM CÙNG DANH MỤC