Trang chủ Thiết Bị Đo Lường Điện Thiết bị hãng Rohde - Schwarz

Rohde-schwarz - Signal Source Analyzer FSUP

Mã sản phẩm: FSUP |
Thương hiệu: Rohde - Schwarz

Giá bán: Liên hệ

Yêu Cầu Giá Tốt

Zalo/ Tell : 0984.843.683

Email: hien@ttech.vn

Thông tin sản phẩm

Key Facts

Frequency range up to 8 GHz, 26.5 GHz or 50 GHz (up to 110 GHz with external mixers)
Maximum dynamic range through cross-correlation
Analysis of settling in time domain
Oscillator characterization
Detection, suppression and listing of interference
Maximum flexibility for phase noise measurements
Low-noise source for supply and tuning voltages
Analysis of signals with digital and analog modulation

Features & Benefits

Highly flexible phase noise tester with versatile measurement capabilities
- Phase detector method with internal/external reference
- Two-DUT method
- High sensitivity
- Automatic setting of all important parameters
- Easy operation
- Detection, suppression and listing of interference
- Measurement of reference points as a function of frequency
- Measurement of residual phase noise
- AM noise
Maximum dynamic range through cross-correlation
- Sensitivity improved by up to 20 dB
- Cross-correlation up to 50 GHz in a single box
Unique combination of phase noise tester and spectrum analyzer
- Measurement of phase noise using the spectrum analyzer method
- Typical spectrum measurements such as ACP or interference search
- Measurement of noise figure using the R&S^®FSUP
Analysis in the time domain
- Transient response of oscillators
Characteristics at the push of a button
- Low-noise voltage source for supply and tuning voltages
- Complete characterization of oscillators
Analysis of digital and analog modulated signals
- General vector signal analysis of digitally modulated signals
- Special analysis options for digital communications standards
- Analysis of analog modulated signals (AM/FM/φM)

Brief Description

The R&S^®FSUP is a highly flexible phase noise tester with versatile measurement capabilities that combines the scope of functions of a high-end signal and spectrum analyzer with the benefits of a phase-noise-only tester.

Specifications

Condensed Data
Operating modes	signal source analyzer	1 MHz to 8/26.5/50 GHz
	spectrum analyzer	20 Hz to 8/26.5/50 GHz
Signal source analyzer
Phase noise measurement	with spectrum analyzer	10 MHz to 8/26.5/50 GHz
	with phase comparator	1 MHz to 8/26.5/50 GHz
	internal reference	1 MHz to 8/26.5/50 GHz
	external reference	1 MHz to 8 GHz
	with phase comparator and cross-correlation	1 MHz to 8/26 GHz/50 GHz
	max. frequency offset	30 MHz
Residual noise	with phase comparator	1 MHz to 8 GHz (with internal phase detector)
AM noise		specified frequency range of AM diode detector

Sensitivity
Sensitivity with internal reference and internal phase detector
Input level >+10 dBm, spurious and harmonics <–30 dBc, mode "averaged", +20 °C to +30 °C. LNA gain 40 dB, loop bandwidth ≤10 × frequency offset, max. 1 kHz. With the R&S^®FSUP-B60 low phase noise option and the R&S^®FSUP-B61 correlation extension option.
Typical values
Frequency offset	Input frequency, values in dBc (1 Hz) R&S^®FSUP8/26/50						R&S^®FSUP26/50		R&S^®FSUP50
	5 MHz	10 MHz	100 MHz	1 GHz	3 GHz	7 GHz	10 GHz	20 GHz	40 GHz
1 Hz	-114	-116	-87	-75	-62	-55	-52	-48	-42
10 Hz	-136	-135	-110	-91	-87	-80	-77	-71	-65
100 Hz	-143	-146	-134	-115	-106	-97	-95	-89	-83
1 kHz	-157	-161	-160	-134	-123	-118	-116	-112	-106
10 kHz	-165	-168	-168	-143	-131	-129	-126	-120	-114
100 kHz	-171	-170	-176	-158	-139	-140	-138	-132	-126
1 MHz	-	-175	-177	-165	-160	-155	-150	-146	-140
10 MHz	-	-	-179	-172	-170	-170	-167	-161	-155
30 MHz	-	-	-179	-172	-170	-170	-170	-165	-159

VCO parameter characterization
Measurement parameters	VCO tuning characteristic, VCO tuning slope, power, pushing ON/OFF, harmonics measurement, VCO DC characteristic, summary
Frequency range	R&S^®FSUP8	10 MHz to 8 GHz
	R&S^®FSUP26	10 MHz to 26.5 GHz
	R&S^®FSUP50	10 MHz to 50 GHz
Power supplies	tuning ports	2
	DC ports	2
	additional ports	1