PXI Stimuli Instrumentation GX1034 Marvin Test

PXI Stimuli Instrumentation
Model: GX1034
Hãng: Marvin Test

The GX1034 provides a DC voltage source reference, an AC voltage source reference, 8 low drift resistor references, and a precision 10 MHz frequency reference. The DC and AC sources supply up to ±9 V and include a 3 decade resistive divider network for attenuation of the output level. The resistor references include four- wire 1, 10 and 100 Ω resistors and two-wire 1 K, 10 K, 100 K, 1 M and 10 MΩ resistor values. The 10 MHz frequency reference employs a high stability, oven controlled crystal oscillator which can also provide lower frequencies via a 24-bit divider. Both the 10 MHz output and the divider output can drive 50 Ω loads. In addition, when the module is installed in slot 2 of a PXI chassis, it can be the PXI 10 MHz backplane clock source.

Thông số kỹ thuật

GENERAL
Source / Measure Channels	Meas Hi, Meas Lo,  Sense Hi, Sense Lo
Source / Measure Connector	9 position, D-sub
10 MHz Reference Connector	BNC & PXI backplane connector
Format	PXI, 3U single slot, compatible with PXI Express hybrid slots
DC SOURCE STANDARD
Output Voltage	±9.0, ±0.9, ±0.09, ±0.009 V, nominal
Initial Accuracy	0.002% (with EEROM calibration value), each output level and polarity calibrated with NIST traceability
Temperature Coefficent	0.6 ppm / °C
Long Term Drift	6 ppm for 1000 hours
Output Divider	Resistive, series network: 10 kΩ, 1 kΩ, 100 Ω, 10 Ω
AC SOURCE STANDARD
Output Voltage	3.5, 0.35, 0.035, 0.0035 VRMS, nominal
Waveform	Sine
Frequencies	50 Hz, 60 Hz, 100 Hz, 400 Hz, 1 kHz, 10 kHz, 100 kHz Initial accuracy: ±0.1 ppm, 7.5 digits
Initial Output Voltage Accuracy	50 Hz, 60 Hz, 100 Hz, 400 Hz, ±0.08% 1 kHz, 10 kHz, ±0.05% 100 kHz, ±0.4% (with EEROM calibration value) Each level and frequency calibrated with NIST traceability.
Temperature Coefficient	3 ppm / °C (voltage reference)
Long Term Drift	6 ppm for 1000 operating hours
Output Divider	Resistive, series network: 10 kΩ, 1 kΩ, 100 Ω, 10 Ω

>>> Mua GX1642 giá hấp dẫn