PRO Series Drives PRO-A08V48 ElectroCraft

Mã sản phẩm: PRO-A08V48 |
Thương hiệu: Electrocraft

Giá bán: Liên hệ
Technology: Brushless Digital Servo Drive
Quadrants: 4
Nominal Current: 8A

Yêu Cầu Giá Tốt

Thông tin sản phẩm
Compact. Intelligent.
The ElectroCraft PRO Series Programmable Servo Drives are based on a new design concept offering a cost effective, compact and modular solution for the control of rotary or linear brushless, stepper or PMDC brush motors of powers up to 385W, with 48V nominal voltage. The ElectroCraft PRO Series drive integrates advanced motor control and motion control functionality in a single plug-in module or stand-alone drive.
The PRO-A08V48 offers a flexible and modular solution in two form factors: PCB Mount (PE models) or built into a stand-alone package with pluggable connectors (SA models). With the comprehensive and flexible motion instruction set, the PRO-A08V48 is an intelligent drive that is programmable for many applications and levels of experience.


Model Numbers Power Supply Voltage
(VDC)
Aux Voltage
(VDC)
Continuous Current
(Amps)
Peak Current
(Amps)
Max Power
(Watts)
Frequency of
Power Output Stage
(kHz)
Efficiency
(%)
PRO-A0xV48B-SA-CAN 11 - 50 - 8 20 385 - -
PRO-A0xV48x-PE-CAN 11 - 50 - 8 20 385 - -

Control Inputs
Hall input signals A, B, C TTL / CMOS / Open Collector
Encoder input signals TTL / CMOS / Open Collector
Digital inputs PCB Mount: x8 (Enable, 2 limit switches, 5 general purpose)
Stand Alone: x8 (2 enables, 2 limit switches, 4 general purpose)
Aux Analog Input x2 / 12-bit, 0 - 5V
Outputs
Auxiliary Voltage Sources for Hall Sensors 5VDC / 350mA
Digital outputs x5 (Ready, Error, 3 general purpose)
Display
LEDs Power-Motor LED: Green - On / Off
Error LED: Red - On / Off
Communications
Serial RS232
CAN Bus CAN-bus 2.0
Mechanical Specs
Dimensions (L x W x H) inches / (mm) PCB Mount: ~ 2.2 (56) x 1.73 (48.1) x 0.27 (8.9)
Stand Alone: ~ 3.48 (88.5) x 3.03 (77) x 0.65 (16.4)
Weight in ounces / (grams) PCB Mount: 0.56 (16) / Stand Alone: 3.9 (110)
Operating Temperature (°C) 0 - 40
Storage Temperature (°C) -40 to +85
Humidity Range Not Condensing (% rH) 5% to 90% Relative, Non-condensing
Regulatory Compliance
CE IEC60529
UL UL508
Operation Mode
Operation Mode Single axis motion controller
Intelligent slave executing I/O triggered motion sequences
Multi-axis, distributed motion solution
Intelligent slave executing network (RS232 or CAN) triggered motion sequences
Pulse and Direction (Stand Alone)
Feedback Modes
Feedback Modes Incremental encoder
Incremental encoder + hall
Analog Sin/Cos encoder
Linear halls
Tachometer
Open-loop (stepper motor only)
SSI encoder (Stand Alone)


SẢN PHẨM CÙNG DANH MỤC