Power Master II display PM2 Array Solutions

Mã sản phẩm: PM2 |
Thương hiệu: Array Solutions

Giá bán: Liên hệ
Power Master II display
Model : PM2
Hãng : Array Solutions

Yêu Cầu Giá Tốt

Thông tin sản phẩm
- ALC-1 - ALC protection option, shuts down your transmitter fast but yet allows ALC normal operation    
- FASTEST Bar graph on the Market, makes tuning an amp or a tuner a joy, faster than an analog meter. So fast it can catch the first "dit" at 99 WPM and even show you if your rig has a RF spike problem.  Why mess around with other meters that have have had display failures?
- Displays VSWR, Power, and Bar graph at the same time.
- Support for BLIND Hams via www.hampod.com   
- Runs with or without a PC connected to it. That means there are no programming hassles and issues setting this meter up. 
- Runs right out of the box.

- Accuracy typically better than +/- 3% over frequency and temperature ranges    
- Commercial couplers available for VHF and UHF commercial bands
- Peak Hold Modes – programmable for fast(1/2 sec), medium, slow, and Long ( 5 sec) for CW, SSB, data, FM, whatever you're sending!    
- Two Models – 3 kW and 10 kW - standard coverage is 160 m through 6 m (1.8 to 54 MHz)
- Separate Display and Coupler/Sensor boxes–  Sensor can be remotely located at your amp or in your mobile unit this also keeps the high power cables away from your radios, audio equipment, PCs etc.  No nasty RF cables on top of your desk or radio to cause RFI and other clutter issues! The coupler is using DC only, no RF is sent to the meter. A good thing!
- Remote use, even 100 feet of cable between sensor and display has no drop in power measurement. 
- Multiple couplers on one display - the PM II supports two couplers without any external adapters. 
- VSWR Alarm – programmable trip point, LED and Relay – Can shut down your amp fast  
- Power Alarm -  programmable trip point, LED and Relay - Alerts you that your amp has tripped out
- Alarms can maintain until manually reset, or you can program an auto alarm reset
- Bar Graph – Operates in two modes, Auto Ranging Power and VSWR you can peak your amp sending dots or talking into a mic, or dip your VSWR with your tuner using dots. Easy on the tubes and efficient.

- Bar Graph in Power mode – Auto Ranging in user selectable ranges – Easy to read  
- Large LCD Display – Easy to read even in bright sunlight - low energy consumtion
- Programmable from front panel or via USB or RS232 – Even display your call letters in it too!
- Free Application for your PC - Will allow remote user’s full use of meter even on the internet  
- All Metal Boxes – Rack Mount Options available, 1 or 2 units in a 19” 2U panel
- Choice of connectors, SO239, Type-N, and 7/16 DIN
- Display Head Size 7” X 3-3/4" Face, 4-1/2” Deep
- Interface to any RS232 Port or USB port
SẢN PHẨM CÙNG DANH MỤC