PIE 334 Plus Process Loop Calibrator 4-20mA with loop leakage current detection

PIE 334 Plus Process Loop Calibrator 4-20mA with loop leakage current detection 

1. Loop diagnostics mode measures loop leakage current, total loop resistance and AC voltage present in real time while the loop is in operation


2. Much more responsive display makes for easier and faster adjustments


3. Protective rubber boot for toolbox toughness


4. 1000% improvement in battery life allows up to 125 hours of nominal use per battery change


5. Source 0.00 to 24.00 mA (-25% to 125%)


6. Read 0.00 to 52.00 mA (-25% to 300%)


7. Simulate 2-Wire Transmitters 0.00-24.00mA


8. Power and read 2-Wire transmitters 0.00-24.00 mA


9. Better than ±0.025% of reading accuracy (± 1/2 lsd)


10. Large, high contrast graphic display (.413” digits)


11. EZ-Dial Knob - Easily adjust output by 0.01 mA


12. EZ-Check Switch will instantly output 4.00 mA, 20.00 mA or dial knob user set output


13. Slide switches allow for easy to use operation