| Moisture Sensor |
- Range: -110°C to +20°C dewpoint ( -166°F to +68°F dewpoint )
- Accuracy: ±2°C temperature corrected
- Repeatability: 0.8°C
- Response time: 95% of step change in 3 min.
- Sample flow: >1 LPM
|
| Temperature Sensor |
- Range: -40°C to +70°C
- Accuracy: ±2°C
|
| Pressure Sensor |
- 2 to 150 PSIA ±1%, 316L stainless steel wetted parts; higher pressures can be ordered optionally
|
| Ergonomics |
- Comfortable to hold in hand, contoured body design, lightweight 1.75 Lbs
- Hook and magnet for easy temporary field securing / mounting
- Easy to read graphic LCD display with user controlled backlight brightness (LCD is readable without the backlight)
- Snap dome tactile membrane switches with dynamically assigned legends
- Audible feedback upon button press as well as for warnings and alarms
- Auto scaling graph / histogram on moisture measurement display for stability verification
- Easy to use with verbose built-in context sensitive Help screens
- Battery Saver, with user selectable Auto-power-down times, can also be disabled
- Built-in pressure measurement and pressure corrected moisture readings, simultaneously displayed with the uncorrected reading for
- greater ease of understanding
- Verbose Status bar with indications, warnings and audible errors
- User selectable locking with or without a password.
- Built-in battery backed clock calendar
|
| Electrical |
- External AC Universal Power adapter (100-240VAC 50-60Hz) with USB connector
- Rechargeable Li-Ion battery, recharges through the USB connector from the PC or from the supplied universal power adapter
- Sampling system and sensor are isolated from electrical interface and supply grounds
- Measurement resolution of moisture sensor: 1pF resulting in less than 0.01°C
- External power and I/O: USB mini B female connector – IP67 / IP68 with Sealing Cap
|
| Mechanical |
- 1/8″ Swagelok® Inlet and Outlet fitting adapters for the SAE/MS 5/16-24 ports.
- Inlet adapter has a built-in flow control orifice, eliminating pressure regulators while maintaining sufficient but not excessive flows.
- All 316 Stainless Steel and PTFE wetted parts, small surface area stainless steel sampling chamber for fast response time.
- Integral Sensor retraction into desiccant storage chamber for fast response-time when measuring low moisture
- Enclosure
- Impact resistant (>7 Nm to EN 50014) Polyamide 12,
- IP65/EN 60529 ATEX hazardous area use (Ex II 2 G) approved (PTB 02 ATEX 1076U),
- Flammability: UL 94 HB
- Abrasion resistant Polycarbonate display lens
- Dimensions- L: 7.36″ (187mm) W: 4.17″ (106mm) H: 1.97″ (50mm)
- Weight Total: 1.75 Lbs (0.8 Kg)
- Pressure: 150 PSIA (10.3 Bar) — Available with High Pressure Option 500 PSIA (34.5 Bar)
|
| Temperature Range |
- PPMa Analyzer: -20°C to +60°C
- Electronics: -40°C to +85°C
- Moisture Sensor: -20°C to +60°C
- Pressure Sensor: -20°C to +85°C
- LCD operating: -20°C to +70°C storage: -30°C to +80°C
- Enclosure: -40°C to +60°C
|
| Miscellaneous Features |
- NIST traceable calibrations
- Units of measure: °C & °F dewpoint, ppmV, ppmW, µB H2O vapor pressure, grams of H2O / m3,
Lbs H2O /106 standard cubic feet in Natural Gas. (All units auto-scaled)
- Digital & Analog I/O: USB, 4/20mA with HART®
- Data logging – single point, multipoint, time stamping, each sample records: dewpoint, temperature and pressure, ( memory > 4,000 samples)
- Virtual Analyzer PC software for training and evaluation,
- allows the user to experience the exact interface on their own PC with voice explanations
|