Máy đo độ tròn trụ MarForm MMQ 400 Mahr

Mã sản phẩm: MarForm MMQ 400 |
Thương hiệu: MAHR

Giá bán: Liên hệ

Máy đo độ tròn trụ

Model : MarForm MMQ 400

Hãng sản xuất : Mahr

Liên hệ hỗ trợ: 0984.843.683,

Email: info@ttech.vn

Thông tin sản phẩm

Máy đo độ tròn trụ

Model : MarForm MMQ 400

Hãng sản xuất : Mahr

MarForm MMQ 400 is suitable for universal use for extensive workpiece evaluation according to DIN ISO 1101.

High-precision measuring axes in Z and X make every form measuring task possible. MarForm MMQ 400 is available in different versions for

high-precision workpieces
unusually long workpieces
large and heavy workpieces
use in production or in the precision measuring room

Different modules are available with which the MarForm MMQ 400 can optimally be prepared for your requirements:
Motorized or manual centering and tilting table
Vertical axis (Z)with 900 mm, 500 mm or 350 mm measuring length
Horizontal axis (X) with 180 mm or 280 mm measuring length and with digital linear scales in the X and Z axis. For measurements, with which the exact, reproducible locating of the measuring point influences the result.
Manual or fully automatic probe with short measuring circuit, high linearity, low measuring force.
Path control for the fast measuring of a nominal contour

	MMQ 400-2 Z= 350 mm X= 180 mm	MMQ 400-2 Z= 500 mm X= 280 mm	MMQ 400-2 Z= 900 mm X= 280 mm
Roundness deviation (µm+µm/mm measuring height) *	0,01 + 0,00025	0,01 + 0,00025	0,01 + 0,00025
Roundness deviation (µm+µm/mm measuring height) **	0,02 + 0,0005	0,02 + 0,0005	0,02 + 0,0005
Axial run-out deviation (µm+µm/mm measuring radius) *	0,02 + 0,0001	0,02 + 0,0001	0,02 + 0,0001
Axial run-out deviation (µm+µm/mm measuring radius) **	0,04 + 0,0002	0,04 + 0,0002	0,04 + 0,0002
Centering and tilting table	manual / automatic	manual / automatic	automatic
Table diameter (mm)	285	285	285
Table load capacity, centered (N)	600	600	400
Speed (rpm) 50 Hz / 60 Hz	0.2-15	0.2-15	0.2-15
Measuring path, motorized (mm), Z-axis	350	500	900
Straightness deviation / 100 mm measuring path (µm)**, Z-axis	0.15	0.15	0.15
Straightness deviation / total measuring path (µm)**, Z-axis	0.3	0.4	0.9
Parallelism deviation Z-/C-axis in tracing direction (µm)	0.5	0.8	2
Measuring speed (mm/s), Z-axis	0,1-30	0,1-30	0,1-30
Positioning speed (mm/s), Z-axis	0,5 -100	0,5 -100	0,5 -100
Measuring path, motorized (mm), X-axis	180	280	280
Straightness deviation /av. 100 mm measuring path (µm)**, X-axis	0.4	0.5	0.5
Straightness deviation / total measuring path (µm)**, X-axis	0.8	1.5	1.5
Perpendicularity X-/C-axis (µm)	1	2	2
Positioning speed (mm/s), X-axis	0,5-30	0,5-30	0,5-30
Measuring speed (mm/s), X-axis	0,5-10	0,5-10	0,5-10