Máy đo 3D HANDYPROBE NEXT Creaform

Mã sản phẩm: HANDYPROBE NEXT |
Thương hiệu: Creaform 3D

Giá bán: Liên hệ
Manufacturers and production managers can use portable 3D measurement technologies to enable considerably greater flexibility and efficiency in performing quality control (QC) operations directly on the production floor. The HandyPROBE Next™ portable CMM provides measurement accuracy that is insensitive to the instabilities of any environment.

Liên hệ hỗ trợ: 0984.843.683.

Email: hien@ttech.vn

Thông tin sản phẩm

HANDYPROBE NEXT™ HANDYPROBE NEXT™​|ELITE
Accuracy (1) Up to 0.025 mm (0.0010 in.) Up to 0.020 mm (0.0008 in.)
Single Point Repeatability (2) 9.1 m3 (320 ft3) (4) 0.060 mm
(0.0024 in.)
0.044 mm
(0.0017 in.)
Volumetric Accuracy (3) 0.086 mm
(0.0034 in.)
0.064 mm
(0.0025 in.)
Single Point Repeatability (2) 16.6 m3 (586 ft3) (4) 0.088 mm
(0.0035 in.)
0.058 mm
(0.0023 in.)
Volumetric Accuracy (3) 0.122 mm
(0.0048 in.)
0.078 mm
(0.0031 in.)
Volumetric Accuracy (with MaxSHOT 3D or C–Link)(5) MaxSHOT Next™ 0.060 mm + 0.025 mm/m
(0.0024 in + 0.0003 in/ft)
0.044 mm + 0.025 mm/m
(0.0017 in + 0.0003 in/ft)
MaxSHOT Next™|Elite 0.060 mm + 0.015 mm/m
(0.0024 in + 0.00018 in/ft)
0.044 mm + 0.015 mm/m
(0.0017 in + 0.00018 in/ft)
Measurement Rate 80 measurements/s
Weight 5.7 kg (12.5 lbs.)
Dimensions 1031 x 181 x 148 mm (40.6 x 7.1 x 5.8 in.)
Operating Temperature Range 5–40°C (41–104°F)
Operating Humidity Range (non condensing) 10–90%
Certifications EC Compliance (Electromagnetic Compatibility Directive, Low Voltage Directive, RoHS 2 Substance Restrictions Directive), IP50, WEEE
  HANDYPROBE NEXT STYLUS
Weight 0.5 kg (1.1 lbs.)
Dimensions 68 x 157 x 340 mm (2.7 x 6.2 x 13.4 in.)
Operating Temperature Range 5–40°C (41–104°F)
Operating Humidity Range (non-condensing) 10–90%
Certification EC Compliance (Electromagnetic Compatibility Directive, Low Voltage Directive, Radio Equipment and Telecommunications Equipment, RoHS 2 Substance Restrictions Directive), compatible with rechargeable batteries, IP50, WEEE

(1)Typical value for diameter measurement on a calibrated sphere artefact.

(2)Based on the ASME B89.4.22 standard. The probe of the HandyPROBE Next is located within a conical socket. Individual points are measured from multiple approach directions. Each individual point measurement is analyzed as a range of deviations in X, Y, Z (value = range/2).

(3)Based on the ASME B89.4.22 standard. Performance is assessed with traceable length artefacts by measuring these at different locations and orientations within the working volume of the C-Track (value = maximum deviation).

(4)The volumetric accuracy performance of the HandyPROBE Next is dependent on the working volume in which the measurement is made: 9.1 m3 (320 ft3) or 16.6 m3 (586 ft3).

(5)The volumetric accuracy performance of the system when using a MaxSHOT 3D cannot be superior to the default volumetric accuracy performance for a given model.

SẢN PHẨM CÙNG DANH MỤC