LCR Meter 6630E Microtest

Mã sản phẩm: 6630E |
Thương hiệu: Microtest

Giá bán: Liên hệ
LCR Meter
Model: 6630E
Hãng: Microtest

Yêu Cầu Giá Tốt

Thông tin sản phẩm
The test frequency of the 6630E economic LCR meter is AC 10Hz-10MHz. and is suitable for the LCR testes of AC signals. The measurement in a continuously changing environment can be executed stage-by-stage with the test frequency and grade, and high-speed continuous tests can be performed under different test and mode conditions. The 6630E LCR meter also supports RS232, USB and GPIB PC connection capabilities to improve the design and test efficiency significantly.  (LAN reserved)

Signal source frequency range: AC 10Hz ~ 10MHz
Signal source grade: 10mV ~ 2V / 200μA ~ 20mA
Basic accuracy  up to ±0.08%
ALC function
Output resistance 25Ω/100Ω, switchable
Ultra-high measuring speed < 3ms
Open circuit/short circuit/load calibration function
Up to four component parameters can be selected in the electric meter mode. The induction and DCR values can be measured and displayed simultaneously
Auto component classification: Comparator function and Handler BIN classification function
Rapid automation and data access function is realizable for USB, GPIB and RS232 interfaces. (LAN Reserved)
PC connection data analysis software is available

Ultra-low power consumption < 30W, without fans and zero noise

    

     

 Test Frequency 

6630E-10 10Hz ~ 10MHz
Minimum Resolution 100mHz, 6-bit Frequency Input
Accuracy

7 ppm±100mHz

Basic Accuracy ± 0.08% 

 

 

 

AC Measurement     

Test Signal Voltage Level  10mV - 2Vrms
Voltage Minimum Resolution 1mV
Accuracy ALC ON:6% * Voltage ± 2mV
ALC OFF:10% * Voltage ± 2mV
Test Signal Current Level 200µA - 20mArms

Current Minimum Resolution

10µA
Accuracy ALC ON:6% * Current ± 20µA
ALC OFF:10% * Current ± 20µA
Test Time  (The fastest) < 3ms
Output Impedance

25Ω/100Ω, switchable (Nominal value)

Parameters |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 Vdc-Idc、ESR
Measurement Mode

Meter mode, Multi-steps mode

Calibration

Open Circuit/ Short Circuit/Load Calibration
Measurement Circuit   Series/Parallel
Multi-steps Mode 50 groups of Multi-steps setting (Each group contains up to 15 steps)
PC LINK / CPK  Option
Flash Memory

Built-in flash for setting 100 set documents

USB LCR setting documents, BMP graphics, Test result data

 

Interface  

 

I/O Interface Handler

Serial Interface

USB、RS232

Parallel Interface

GPIB
Display 7.0”TFT, 800x480 Color Screen
Environment Temperature: 10℃ ~ 40℃   Humidity: ≦80%
Power Supply  Voltage 90V ~ 264Vac
Frequency 47Hz ~ 63Hz

Power Consumption

Low power consumption: Maximum 30W (Nominal value)

Dimension (W*H*D) 336x147x340 mm
Weight  3 kg


SẢN PHẨM CÙNG DANH MỤC