The test frequency of the 6630 Precision Impedance Analyzer is DC 10Hz-30MHz and the test signal is 10mV-2Vrms (min. resolution 1mV), and is suitable for the LCR and DCR testes of AC signals. The measurement in a continuously changing environment can be executed stage-by-stage with the test frequency and grade, and high-speed continuous tests can be performed under different test and mode conditions. The machine also supports RS232, LAN, USB and GPIB PC connection capabilities to improve the design and test efficiency significantly. MICROTEST 6630 Impedance Analyzer also provides fixtures for material dielectric permittivity measurement that allows PCB designed engineers to reduce the faulty conditions with the comprehensive information of permittivity while designing PCB layouts.
Signal source frequency range: DC 10Hz ~ 3/5/10/20/30MHz
Signal source grade: 10mV ~ 2V / 200μA ~ 20mA
Basic accuracy up to ±0.08%
ALC function
Output resistance 25Ω/100Ω, switchable
Parameters: |Z|, |Y|, θ, R, X, G, B, L, C, D, Q, DCR, ESR, Vac, Iac, Vdc, Idc, ε and μr
Ultra-high measuring speed <3ms
Open circuit/short circuit/load calibration function
Electric meter mode, multistep list mode, scan & analyze mode
Up to four component parameters can be selected in the electric meter mode. The induction and DCR values can be measured and displayed simultaneously
Auto component classification: Comparator function and Handler BIN classification function
Up to 50 sets of multistep list programs can be stored in the permanent memory and up to 15 test steps can be arranged in each program
Rapid automation and data access function is realizable for USB, LAN, GPIB and RS232 interfaces
PC connection data analysis software is available optionally
7" 800*480 TFT LCD color screen
Ultra-light design: 336*147* 340mm, 3kg
Ultra-low power consumption (<30W) without fans and zero noise