FUSION SPLICER SAT-17T Aitelong

Mã sản phẩm: SAT-17T |
Thương hiệu: Aitelong

Giá bán: Liên hệ
FUSION SPLICER
Model: SAT-17T
Hãng: Aitelong

Yêu Cầu Giá Tốt

Thông tin sản phẩm
- Low weight , less than 2Kg with battery and bumper
- Full automatic heater
- 7 sec fast splicing
- Ultra-low Splice loss
- Mirror Less Design
- 7800mAH large Li battery pack
- Compatable with bare fiber,tail fiber and indoor cable
- Wind protect, dust-proof, water-proof

Thông số kỹ thuật


Fiber Type Single Fiber
Applicable Fibers

 SM (single mode), MM (multi-mode), DS (dispersion), NZDS (non-zero dispersion),

BIF/UBIF 

Average Loss  0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS), 0.02dB (BIF/UBIF)
Return Loss  9s / 7s (fast mode)
Typical splicing time  250μm, 600μm, 900μm,2~3mm and 3.5mm
Compatiable cable  250μm, 600μm, 900μm,2~3mm and 3.5mm
Fiber aligning  Core alignment and cladding alignment
Fiber Diameter  Cladding diameter:80~150μm
 Coating diameter:100~1000μm
Magnification  X or Y, magnify 360X
 X + Y, magnify 180X
Image display  High-performance 4.3 inch LCD
Tensile test  Standard 2N
Splicing mode  100 (10 factoty pre-defined)
Heatig mode  100 (4 factory pre-defined)
Heat-shrinkable tubing  60mm, 45mm, 20mm or other types
Battery capacity  7800mAH, 86.58WH
 300 times (splicing and heating)
 Charging time: about 3h (can be used while charging)
Battery life  1000 charging cycles
Electroce life  Typical 3,000 times, and replaceable
External interface  Mini USB
Result record  Maxmium10000 results
Heater Function  Automatic, support user defined heating mode, 0ºC ~ 300ºC adjustable 
Power supply

 Built-in lithium battery: 11.1V;  AC/DC adapter input: AC 100-240V

Output: DC 13.5V / 5.0A

Working Environment

 Temperature: -20ºC ~ +55ºC (-4ºF~131ºF);  Humidity: 95% RH (40°C non-condensing)

Altitude: 0~5000m

Dimension  L×W×H=166×146×159 (mm)
Weight  1.6kg (without battery), 2.0kg (with battery)


SẢN PHẨM CÙNG DANH MỤC