FUEL-VIEW flow meters operate on the principle of a rotary piston that is mounted into a chamber ring which rotates in a chamber case. The rotating speed is measured by electronic sensors which measure a magnetic pulse. The number of pulses in time is proportional to the fuel flow rate. The unique design of the flow meter allows fuel flow, even if the chamber is locked or clogged up. A fuel filter effectively protects the measuring chamber from contamination and can be removed and washed without disassembling the flow meter.
FUEL-VIEW model DFM-250C-K can be used for 5...250 l/h. The instrument has a battery powered LCD display that allows reading of actual flow [l/h], total flow consumption [l], total engine operating time [h], engine operating time in ”idling”, “optimal” and “overload” mode. Additionally this model has a cable for pulse output (with external power).
Thông số kỹ thuật
| Performance |
| Accuracy |
± 1% RD |
| Turndown |
1:50 (2...100%) |
| Media |
Diesel fuel, gasoline*, petrol*, fuel oil, motor fuel, bio fuel.
Other liquids with kinematic viscosity from 1.5 to 6 mm2/sec are possible but maximal flow rate could be lower than the specified flow range and pressure drop over the instrument can be higher. |
| Repeatability |
<0.1% RD typical |
| Operating pressure |
2...25 bar(a) |
| Max. pressure drop |
<0.3 bar(d) at 20°C on diesel |
| Operating temperature |
-20...60°C |
| Humidity |
<95% at environmental temperature of 40°C |
| Vibration |
Max. acceleration of 100 m/s2 in frequency range of 5...250 Hz |
| Aggressive environment |
Resistant to fuel and lubricant material |