Trang chủ Thiết Bị Môi Trường Thiết bị hãng SWR Engineering

Dust measurement ProSens SWR Engineering

Mã sản phẩm: ProSens |
Thương hiệu: SWR Engineering

Giá bán: Liên hệ

The ProSens was specially developed to carry out reliable dust measurement on clean sides after filters.

Dust measurement also in large channel diameters
Output of dust concentration as absolute value
ATEX-certified
Measurement of dust concentration at high temperatures
Trend signal or absolute value

Yêu Cầu Giá Tốt

Zalo/tell: 0984.843.683

Email: hien@ttech.vn

Thông tin sản phẩm

ProSens was specially developed to carry out reliable dust measurement on clean sides after filters.
The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission measurement.

ProSens is used:

if the dust concentration is to be output as an absolute value in mg/m3.
for exact measurements even with large channel diameters.
for applications in explosion hazard zones
(GasEx-Zone 1, DustEx-Zone 20)
for the measurement of dust concentration even at high temperatures.

Sensor	Measuring objects	Particles in the gas flow
	Measurement range	from 0.1 mg/m³
	Process temperature	Standard: 150 °C; (higher temperatures on request)
	Pressure	max. 2 bar (Optional: up to 25 bar)
	Flow speed	min. 4 m/s
	Humidity	95 % rel. hum. or less (non-condensing)
	Measuring principle	Triboelectric effect
	Ambient temperature	- 20... +60 °C
	Sensor rod	Stainless steel; length 500 or 1,000 mm
	Housing	Aluminium
	Protection type	IP 66; ATEX; cat. 1/2 GD
	Electric connection	Connection room DIN M 20
	Weight	Approx. 1.5 kg

Transmitter (DIN rail)	Power supply	24 +/- 10 % V DC
	Power consumption	20 W / 24 V
	Protection type	IP 40 to EN 60529
	Ambient operating temperature	- 10... + 45 °C
	Dimensions	23 x 90 x118 (W x H x D)
	Weight	approx. 172 g
	Connection terminals conductor cross-section	0.2 - 2.5 mm² (AWG 24-14)
	Current output signal	4 ... 20 mA, load 500 Ω
	Switch output measurement alarm	Relay with switchover contact, max. 250 V AC, 1 A
	Interface	ModBus RTU (RS 485)
	Data backup	Flash memory