Thông tin sản phẩm
- The DCS-400 and SBV-202P are non-contact capacitive sensors that are embedded in a stator slot or wedge, facing the stator bars, to measure in-slot stator winding vibration. Apart from having two completely distinct installation procedures, these sensors both transfer their raw signal to a conditioner to be converted into a linearized 4 to 20 mA signal.
Sensors
- Operation
+ Measurement Type : Non-Contact Proximity, Capacitive Technology
- Connection
+ Integral Cable
DCS-400 : Coaxial
SBV-202P : Triaxial
+ Integral Cable Connector
DCS-400 : Male, Nickel-Plated SMA
SBV-202P : Male, Gold-Plated SMA and Ground Terminal
- Environment
+ Temperature Range Operating : 0 to 125°C [32 to 257°F]
+ Magnetic Field Immunity : Up to 2 Tesla (50 or 60 Hz)
+ Dust and Oil Contamination : Films Have No Effect
+ Humidity : Up to 95%, Non-Condensing
- Physical Characteristics
+ Sensor Material : Non-Conductive and SemiConductive Material
+ Integral Cable Material : FEP Jacket / Teflon Insulation
Extension Cable
- Connection
+ Cable Type Triaxial
+ Absolute Minimum Length Nominal Minus 0.5 m [19.7 in]
+ Connector
Sensor Side : Female, Gold-Plated SMA and Ground Terminal
Conditioner Side : Male, Gold-Plated SMA and Ground Terminal
+ Minimum Bending Radius 10 cm [4 in]
- Environment
+ Temperature Range : 0 to 75°C [32 to 167°F]
- Physical Characteristics
+ Cable Material : PVC Jacket / PE Insulation
LIN™-300 Conditioner
- Power Requirements
+ Voltage : 24 Vdc ±15%
+ Consumption : 100 mA max.
+ Protection : Auto-Reset Fuse
+ Warm-Up Time : 30 Minutes
- Connection
+ Power / Output : 5-Pin M12 Male
+ Sensor Input : Female, Gold-Plated SMA and Grounding Termina
- Environment
+ Temperature Range
Operating : 0 to 55°C [32 to 131°F]
Storage (Measuring Chain) : -25 to 70°C [-13 to 158°F]
- Physical Characteristics
+ Body : Nickel-Plated Aluminum
+ Mounting : 4 Slots for #6 (M3.5) Screws
+ Max. Torque on SMA : 1.1 Nm [10 in-lb]
+ Status Indicator : Bi-Color LED