General
This device is an error rate tester to measure bit error from input data in the transport stream (TS) format. This device consists of a transmission part (Transmit) which generates data for the measurement and a receiver part (Receiver) which measures the data. A MPEG-TS mode and a CONTINUANCE mode are equipped. The error rate of the TS packet format of each digital broadcasting can be measured at the MPEG-TS mode and the general error rate by the pseudo- random signal can be measured at the CONTINUANCE mode
Features
- The measurement data up to 210-Mbit/s are corresponded.
- When connecting to Eiden’s OFDM signal generator and when using the PRBS data generated internally by this device, the error rate measurement in the MPEG-TS format of the terrestrial digital broadcasting can be realized.
- When connecting to Eiden’s CMMB signal generator, the error rate measurement for the CMMB data can be realized.
- This device consists of the transmission part which generates the signal for the measurement and the receiver part which receives the signal.
* The measurement data in both the MPEG-TS packet format and the PRBS data format can be supplied.
- Packet Error Rate (PER) can be measured.
- Erroneous Second Ratio (ESR) can be measured.
- Null-packet filtering function is equipped.
- A GP-IB interface and a ETHERNET interface are equipped for the remote control.
- A touch-panel of a seven-inch TFT color crystal-liquid display is equipped. Therefore, an user interface having
Composition
Main Body: One
Dimensions: 350 (W) x 180 (H) x 230 (D) mm
Weight: Approx. 6 kg
- Accessories
Power Cable (Including conversion connector three pins to two pins: One
Instruction Manual:
One
Test Data: One
- Power Source
Allowable Range of Input Voltage:
100 VAC to 240 VAC (50/60 Hz)
Power Consumption:
Less than 50 VA
- Operation Environment
Ambient Temperature:
+5 °C to +40 °C