Features:
- Digital technology enabled regulated power to the generator and realized stable cleaning.
- "Self diagnostic function" is built-in.
- Rich remote control function; Output power on / off or control, Operation mode, Alert signal.
Four Oscillation can cover wide range of contamination and matches for various objects
1. Dual frequency mode
Delivers good agitation especially for cavitation spot and carry ultrasonic power farther from the transducer efficiently.
Generate pumping effect and effectively cleans inside narrow tube or thru-hole PCB.
2. FM (Frequency Modulation) mode
Vibration nodes of standing wave move efficiently and clean works evenly in a cleaning tank.
Cavitation position moves by modulation sweep, erosion damage can be reduced.
3. Single frequency mode
Generates strong cavitation power and removes stif stains.
4. Pulse Oscillation mode
Intermittent ultrasonic pulse output cause gentle cleaning power. It also effective to degas the water.
Type |
WD-600-28T |
WD-600-40T |
WD-1200-28T |
WD-1200-40T |
Oscillation |
Dual frequency (DUAL)
Frequency Modulation (FM)
Single frequency (SINGLE)
Pulse Oscillation (PULSE) |
Output power |
DUAL/FM |
400 W |
800 W |
SINGLE |
600 W |
1200 W |
PULSE |
Max. 600 W |
Max. 1200 W |
Output frequency |
28 kHz
|
40 kHz
|
28 kHz
|
40 kHz
|
Power source |
200, 220, 230, 240 V AC
50/60 Hz 1200 VA |
200, 220, 230, 240 V AC
50/60 Hz 2400 VA |
Dimension |
330(W)x463(D)x150(H)mm
(exclude raised part, foot) |
Weight |
11 kg |
12 kg |
* Voltage must be selected when order is made.
I/O interface:
Output power ON/OFF (contact point)
Output power control (8 points)
Irregular output warning (Relay output, on state when error)
DUAL/FM frequency sweep range: 1 kHz from center frequency
Output power control: 20 - 100 % (8 steps)
Display: Output power level indicator (LED)
Operating condition: Tmp.: 0 to 40 deg C, Rel. Hmd.: 0 to 80 % (no condensation)
Power cord: 3.5 m
Option: I/O remote cable (5, 10 m), Terminal block