Key Features
Small and light pocket vibration analyzer
No batteries needed (powered from the PC)
Memory size depends on the PC
Ideal for traveling and for teaching purposes
Technical Specifications
Input channels:4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACHO for speed probe / external trigger
Input range:AC +/- 12 V peak-peak
DC +/- 24V
AD conversion:24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:120 dB
Frequency ranges:Maximum range: 1 Hz - 90 kHz (1 Ch, 194 kHz sampling)
Maximum range: 1 Hz - 25 kHz (4 Ch, 64 kHz sampling)
Minimum range: 1 Hz - 25 Hz (4 Ch, 64 Hz sampling)
Sampling mode:Fully simultaneous for 4 channels
FFT resolution:Min. 100 lines
Max. 3 276 800 lines
Measurement modes:Analyzer - analytical measurements
Data collector - route measurements
Balancer - 1 and 2 plane on site balancing
Recorder - raw signal recording for later post analysis
Stethoscope - listening of the bearing/machine noise
FASIT - expert system for automatic fault detection
Octave analyzer - hearable sound measurement
Bump test - measurement of natural frequencies
ADS - Animated Deflection Shapes (Operating deflection shapes)
Ultrasound - measurement of ultrasound in 30 - 50 kHz range
Processor:According to the PC
Memory, Route:According to the PC hard drive
Data processing:Real time FFT
DEMOD - ENVELOPE analysis
ACMT - low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
Signal recorder:3 GB/hour of memory consumption with 64 kHz sampling frequency measured on all 4 Channels
Trigger:Manual, External, Signal level, Time
Use for signal recording trigger
Speed change, Time interval
Interface:USB 3.0, 2.0 compatible
Temperature range:-10˚C to +50˚C
Power:USB powered
Case:Aluminium - heavy duty
Size & Weight:110 x 115 x 35 mm, 350 g
Minimum PC requirements:CPU : Intel Atom 1.66GHz
RAM: 1GB RAM
HDD: 160GB
USB full speed 1.1 or 2.0