Ligno-Scanner S Moisture Meter Lignomat

Mã sản phẩm: |
Thương hiệu: Lignomat

Giá bán: Liên hệ

The Ligno-Scanner S gives true wood moisture readings in percent using built-in corrections for different species. Corrections can also be programmed by entering the specific gravity between 0.3 and 1.0. Resolution is 0.1% for entire measuring range. HOLD function is available in all pinless meters from Lignomat.

Yêu Cầu Giá Tốt

Thông tin sản phẩm
Measuring
Range
5-60% dependent upon species setting*
Display 0.1% resolution for the entire range.
Species
Corrections
71 wod group settings, or simpy use the specifi graviy of the wood, betwee 0.3 and 1.0 (setting 30-100)
Measuring Depth 1/4″ measuring depth
Reference
Scale
0-99 for non-wood building materials
Calibration
Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary.
Calibration Check  External calibration check block #TS is available to verify the calibration and functions of meter.
Included Pouch, one 9V battery, manual and laminated wood group chart.
Size Pocket-size  2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″
Weight 8 ounces (200g), made out of high-impact plastic
Warranty All moisture meters have a 2 year warranty. Pins and battery are excluded.

The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.

The entire measuring pad has to be on a flat and smooth surface for accurate readings

*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.

The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.


SẢN PHẨM CÙNG DANH MỤC