Features
High precision leakage current and duration settings
Allows no load setup of leakage current and test dwell times
Once entered, leakage current and test dwell times can be referenced on the front panel display at any time
Leakage currents can be set from 1-10 mA AC or 1-5mA DC in 0.1mA increments
Dwell times can be set from 1-60 seconds in 1 second increments
Small and light. 11.25" wide x 4.75" high x 11" deep. 16 lbs
Leakage current and dielectric breakdown shutdowns can be defeated to allow troubleshooting of problems
Simple test outcome judgement. Green lights mean pass - red lights mean fail. Failing tests sound a buzzer as well
NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance
Operation Instructions are printed on the rear panel for easy reference
In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems
RED lights and a buzzer leave no question if a failure has occurred
| Voltage Test Type |
AC/DC |
| Voltage Range |
0-5000 AC 0-6000 DC |
| Current Range |
1-10 mA AC 1-5 m A DC |
| Input Voltage Requirements |
117-127 V, 50 /60 Hz |
| Fuse Requirements |
See Rear Panel for correct rating |
| Arc Detect |
Separate high Frequency circuit |
| Leakage Detect |
Separate Low frequency circuit |
| Test Time Range |
1 - 60 seconds |
| Ramp time Range |
1 - 5 Seconds |
| Voltage Meter Accuracy |
± 2 % |
| Duty cycle |
100% |
| Discharge Time (Resistive Load) |
Factory Set 8 Sec max |
| Transformer Output |
< 500 VAC |
| Pass/Fail Repeatability |
± 3 % |
| Output connector |
High Voltage Jack |
| Display |
4 digits LED display |
| Test indicator |
Led indicators |
| Failure Indicator |
Led indicators and buzzer |
| Programable |
No |
| PLC Interface |
Optional |
| TestLink |
No |
| Testminder |
No |
| Voltage Hold on failure |
Available |
| Top Mounted handle |
Optional |
| Test Defeat |
-Ramp Time
-Test Time
-Breakdown Detect |
| Autoreset on Pass |
Optional |
| Operation Temperature |
15 - 40 °C |
| Relative Humidity Range |
0 - 90 % Non-condensing |
| Dimensions |
10" wide x 5" high x 12" deep |
| Weight |
17.5 Lb |
| Calibration |
One year calibration Certificate |
| Test Cords |
Return lead
High Voltage Test Lead
Power cord |